Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000027B5D |
Model Year Start: 2023 |
Model: Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: 2ZR-FAE (COOLING): COOLING FAN MOTOR: REMOVAL; 2023 MY Corolla [09/2022 - 11/2022] |
REMOVAL
PROCEDURE
1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
2. REMOVE HEADLIGHT ASSEMBLY
Click here
3. REMOVE INLET NO. 3 AIR CLEANER
(b) Disengage the claw to remove the inlet No. 3 air cleaner.
4. REMOVE INLET NO. 1 AIR CLEANER
(a) Remove the 4 bolts and inlet No. 1 air cleaner from the upper radiator support sub-assembly and inlet No. 2 air cleaner.
|
|
5. REMOVE INLET NO. 2 AIR CLEANER
(a) Remove the inlet No. 2 air cleaner from the air cleaner case sub-assembly.
|
|
6. REMOVE HOOD LOCK ASSEMBLY
Click here
7. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
(a) Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.
|
|
(b) Disconnect the 2 horn connectors.
|
|
(c) Disengage the 3 clamps to disconnect the wire harness from the upper radiator support sub-assembly.
|
|
(d) Remove the 5 bolts and upper radiator support sub-assembly.
|
|
8. DISCONNECT NO. 3 WATER BY-PASS HOSE
(a) Disengage the 4 clamps to disconnect the No. 3 water by-pass hose from the fan shroud.
|
|
9. DISCONNECT NO. 2 RADIATOR HOSE
(a) Disengage the clamp and disconnect the No. 2 radiator hose from the hose clamp.
|
|
10. DISCONNECT NO. 3 RADIATOR HOSE
(a) Remove the 2 bolts to disconnect the No. 3 radiator hose from the fan shroud.
|
|
11. REMOVE NO. 2 RADIATOR AIR GUIDE
(a) Disengage the 4 claws to remove the No. 2 radiator air guide.
|
|
12. REMOVE FAN WITH MOTOR ASSEMBLY
(a) Disconnect the cooling fan ECU connector.
|
|
(b) Disengage the wire harness clamp from the fan shroud.
(c) Disengage the 2 claws.
|
|
(d) Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.
NOTICE:
Do not damage the radiator assembly when removing the fan with motor assembly.
13. REMOVE FAN
(a) Remove the nut and fan.
|
|
14. REMOVE COOLING FAN MOTOR
(a) Disengage the 2 clamps to disconnect the wire harness from the fan shroud.
|
|
(b) Disconnect the cooling fan motor connector.
(c) Remove the 3 screws and cooling fan motor from the fan shroud.
|
|
|