| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM10000000277WD |
| Model Year Start: 2023 | Model: Corolla | Prod Date Range: [09/2022 - ] |
| Title: HYBRID / BATTERY CONTROL: BATTERY BLOWER: INSTALLATION; 2023 - 2025 MY Corolla Corolla HV [09/2022 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL BATTERY COOLING BLOWER ASSEMBLY
(a) Install the battery cooling blower assembly to the HV battery with the bolt and 2 nuts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
NOTICE:
- Be sure not to touch the fan part of the battery cooling blower assembly.
- Do not lift the battery cooling blower assembly using the wire harness.
(b) Connect the battery cooling blower assembly connector.
2. INSTALL NO. 1 EV BATTERY INTAKE DUCT
(a) Install the No. 1 EV battery intake duct to the battery cooling blower assembly with the clip.
3. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
|
(a) Temporarily install the rear seat cushion leg sub-assembly with the 7 bolts. |
|
(b) Fully tighten the 7 bolts in the order shown in the illustration.
Torque:
16 N·m {163 kgf·cm, 12 ft·lbf}
4. INSTALL REAR UNDER COVER
(a) Engage the 2 guides.
(b) Engage the 2 clips to install the rear under cover to the rear seat cushion leg sub-assembly.
5. INSTALL REAR UNDER SIDE COVER LH
Click here
![2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): INSTALLATION+](/t3Portal/stylegraphics/info.gif)
6. INSTALL REAR DOOR SCUFF PLATE LH
Click here
7. INSTALL REAR UNDER SIDE COVER RH
HINT:
Use the same procedure as for the LH side.
8. INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
9. INSTALL REAR SEAT CUSHION LOCK HOOK
Click here
10. INSTALL REAR SEAT CUSHION ASSEMBLY
Click here
11. CONNECT REAR SEAT CENTER LAP TYPE BELT ASSEMBLY
Click here
|
|