PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM (for Gasoline Model): C061012; Right Electric Parking Brake Actuator Control Circuit Short to Battery; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM10000000277R1
Model Year Start: 2023	Model: GR Corolla	Prod Date Range: [09/2022 - ]
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM (for Gasoline Model): C061012; Right Electric Parking Brake Actuator Control Circuit Short to Battery; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 - ]

DTC

C061012

Right Electric Parking Brake Actuator Control Circuit Short to Battery

DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory	Note
C061012	Right Electric Parking Brake Actuator Control Circuit Short to Battery	Diagnosis Condition: Electric parking brake not operating Malfunction Status: The ECU power supply is normal but there is a malfunction in the electric parking brake actuator RH internal circuit (short to +B). Detection Time: Approximately 0.015 to 0.195 seconds (depending on each malfunction)	Parking brake actuator assembly RH No. 1 parking brake wire assembly Wire harness or connector Skid control ECU (brake actuator assembly)	DTC stored	An electric parking brake system malfunction is displayed on the multi-information display.

Click here

1.	CHECK FOR SHORT TO +B

(a) Turn the engine switch off.

(b) Make sure the No. 1 parking brake wire assembly is securely installed.

(d) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
o1-2 (+) - o1-1 (-)	Electric parking brake not operating	Below 1 V

*a	Front view of No. 1 Parking Brake Wire Assembly (to Parking Brake Actuator Assembly RH)

2.	CHECK FOR SHORT TO +B

(a) Disconnect the oO3 No. 1 parking brake wire assembly connector.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
oO3-1 - oO3-2	Electric parking brake not operating	Below 1 V

*a	Front view of wire harness connector (to No. 1 Parking Brake Wire Assembly)

REPLACE NO. 1 PARKING BRAKE WIRE ASSEMBLY

3.	CHECK FOR SHORT TO +B

(a) Disconnect the oO3 No. 1 parking brake wire assembly connector.

(b) Disconnect the A51 skid control ECU (brake actuator assembly) connector.

*a	Front view of wire harness connector	*b	(to Skid Control ECU (Brake Actuator Assembly))
*c	(to No. 1 Parking Brake Wire Assembly)	-	-

Standard Voltage:

Tester Connection	Condition	Specified Condition
oO3-1 or A51-2 (MRR+) - Body ground	Always	Below 1 V
oO3-2 or A51-3 (MRR-) - Body ground	Always	Below 1 V

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

REPAIR OR REPLACE HARNESS OR CONNECTOR