- Blind Spot Monitor System (for Gasoline Model (w/o Safe Exit Assist Function))
- Blind Spot Monitor System (w/ Safe Exit Assist Function)
| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM10000000275VY |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during blind spot monitor sensor removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced[ (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Blind spot monitor sensor |
Blind spot monitor beam axis adjustment |
Blind Spot Monitor System (w/ Safe Exit Assist Function) |
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Blind spot monitor sensor |
Blind spot monitor beam axis adjustment |
|
|
PROCEDURE
1. BSM ECU DATA SAVE (except TMMMS Made)
Click here
![2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: ADJUSTMENT+](/t3Portal/stylegraphics/info.gif)
2. REMOVE REAR BUMPER ASSEMBLY
for Hatchback except GR: Click here
for Hatchback, GR: Click here
for Sedan: Click here
3. REMOVE BLIND SPOT MONITOR COVER LH (for Sedan)
(a) Disengage the 2 claws to remove the blind spot monitor cover LH as shown in the illustration.
|
Remove in this Direction |
4. REMOVE BLIND SPOT MONITOR COVER RH (for Sedan)
(a) Disengage the 2 claws to remove the blind spot monitor cover RH as shown in the illustration.
|
|
Remove in this Direction |
5. REMOVE BLIND SPOT MONITOR SENSOR LH
|
(a) Disconnect the connector. |
|
(b) Remove the 3 nuts and blind spot monitor sensor LH.
NOTICE:
Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.
6. REMOVE BLIND SPOT MONITOR SENSOR RH
|
(a) Disconnect the connector. |
|
(b) Remove the 3 nuts and blind spot monitor sensor RH.
NOTICE:
Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.
|
|