| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM10000000275NQ |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL LH
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE INLET NO. 1 AIR CLEANER (w/ Engine Hood Courtesy Switch)
for M20A-FKS:
Click here
for 2ZR-FAE:
Click here
3. REMOVE FRONT FENDER LINER LH
Click here
4. REMOVE HEADLIGHT ASSEMBLY LH
Click here
5. REMOVE HOOD LOCK ASSEMBLY
(a) w/ Engine Hood Courtesy Switch:
|
(1) Disconnect the connector. |
|
|
(2) Disengage the clamp. |
|
(b) for Hatchback:
|
(1) Using a screwdriver with its tip wrapped with protective tape, remove the hood lock nut cap. |
|
|
(2) Remove the 2 bolts and hood lock bolt. |
|
(c) for Sedan:
|
(1) Remove the 3 bolts. |
|
|
(d) Disconnect the hood lock control cable assembly to remove the hood lock assembly. |
|
6. REMOVE FRONT DOOR SCUFF PLATE LH
Click here
7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
Click here
8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
9. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
|
(a) Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly. |
|
10. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disengage each clamp and the grommet as shown in the illustration.
|
*1 |
Hood Lock Control Cable Assembly |
- |
- |
|
*a |
Clamp |
*b |
Grommet |
HINT:
Tape the screwdriver tip before use.
(b) Pull the hood lock control cable assembly from the engine compartment to remove it.
|
|