Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM10000000275H7
Model Year Start: 2023 Model: Corolla Hatchback Prod Date Range: [09/2022 - 03/2023]
Title: K120 / K121 (CVT): TRANSMISSION CONTROL CABLE (for TMMMS Made): INSTALLATION; 2023 MY Corolla Corolla Hatchback [09/2022 - 03/2023]

INSTALLATION

PROCEDURE

1. INSTALL FLOOR SHIFT TRANSMISSION CONTROL SELECT CABLE

NOTICE:

Before installing the floor shift transmission control select cable, check that the shift lever is in N.

(a) Turn the transmission control shaft lever clockwise until it stops, then turn it counterclockwise 2 notches.

*a

N

NOTICE:

If the transmission control shaft lever is turned counterclockwise more than necessary, manual valve link lever sub-assembly may separate from the manual valve.

*1

Transmission Control Shaft Lever

*a

Manual Valve Link Lever Sub-assembly

*b

Manual Valve

(b) Pass the floor shift transmission control select cable into the vehicle and install the floor shift transmission control select cable to the vehicle body with the 2 nuts.

Torque:

6.0 N·m {61 kgf·cm, 53 in·lbf}

(c) Connect the floor shift transmission control select cable to vehicle body with the nut.

Torque:

6.0 N·m {61 kgf·cm, 53 in·lbf}

(d) Connect the floor shift transmission control select cable to the No. 1 transmission control cable bracket with a new clip.

(e) Connect the floor shift transmission control select cable to the transmission control shaft lever as shown in the illustration.

*a

Correct

*b

Incorrect

(f) Turn the nut of the floor shift transmission control select cable 180° counterclockwise. While holding the nut in place, push in the stopper until it clicks twice.

*a

Stopper

*b

Nut

*c

Push in

-

-

(g) Connect the floor shift transmission control select cable to the transmission floor shift assembly. Check that the spring is positioned at "A" and push in the stopper.

*1

Transmission Floor Shift Assembly

-

-

*a

Stopper

*b

Spring

*c

Nut

*d

Push in

Connect in this Direction

-

-

NOTICE:

  • If the stopper cannot be pushed in, slightly turn the nut clockwise and then push in the stopper again.
  • Make sure that the floor shift transmission control select cable is securely locked.
  • Do not forcibly pull the floor shift transmission control select cable into the cabin.

(h) Connect the floor shift transmission control select cable to the transmission floor shift assembly.

Connect in this Direction

NOTICE:

  • Connect the floor shift transmission control select cable all the way to the base of the pin.
  • Connect the floor shift transmission control select cable so that its adjustment lock section is on the driver side.

2. INSTALL CONSOLE BOX ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV [09/2022 - 11/2022]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): INSTALLATION 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV [11/2022 -        ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): INSTALLATION

3. INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR

(a) Install the front No. 1 floor heat insulator to the vehicle body with the 3 nuts.

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

4. INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)

  • for Double Wishbone Type Suspension:

    Click here 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+ 2023 - 2025 MY Corolla Corolla Hatchback [11/2022 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

  • for Torsion Beam Type Suspension:

    Click here 2023 - 2025 MY Corolla Corolla Hatchback [09/2022 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Torsion Beam Type Suspension): INSTALLATION+

5. INSTALL FRONT FLOOR CENTER BRACE

Click here 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+ 2023 - 2025 MY Corolla Corolla Hatchback [11/2022 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

6. INSTALL FRONT FLOOR COVER LH (w/ Cover)

Click here 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+ 2023 - 2025 MY Corolla Corolla Hatchback [11/2022 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

7. INSTALL FRONT FLOOR COVER RH (w/ Cover)

Click here 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+ 2023 - 2025 MY Corolla Corolla Hatchback [11/2022 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

8. INSTALL BATTERY CLAMP SUB-ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2023 MY Corolla Corolla Hatchback [11/2022 - 03/2023]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

9. INSTALL ECM

Click here 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; M20A-FKS (ENGINE CONTROL): ECM: INSTALLATION 2023 MY Corolla Corolla Hatchback [11/2022 - 03/2023]; M20A-FKS (ENGINE CONTROL): ECM: INSTALLATION

10. INSTALL BATTERY

Click here 2023 - 2025 MY Corolla Corolla Hatchback [09/2022 -        ]; MAINTENANCE: M20A-FKS BATTERY: INSTALLATION

11. INSPECT SHIFT LEVER POSITION

Click here 2020 - 2023 MY Corolla Corolla Hatchback [01/2019 - 03/2023]; K120 / K121 (CVT): SHIFT LEVER: ON-VEHICLE INSPECTION+

12. ADJUST SHIFT LEVER POSITION

Click here 2020 - 2023 MY Corolla Corolla Hatchback [03/2019 - 03/2023]; K120 / K121 (CVT): TRANSMISSION CONTROL CABLE (for TMMMS Made): ADJUSTMENT

13. INSPECT FOR EXHAUST GAS LEAK

  • for Double Wishbone Type Suspension:

    Click here 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST PIPE (for Double Wishbone Type Suspension): INSTALLATION+

  • for Torsion Beam Type Suspension:

    Click here 2023 - 2025 MY Corolla Corolla Hatchback [09/2022 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST PIPE (for Torsion Beam Type Suspension): INSTALLATION+