Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM10000000275GG
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER (for Hatchback): REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during tire pressure warning ECU and receiver removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replacement Part or Procedure

Necessary Procedures

Effects/Inoperative when not Performed

Link

Tire pressure warning ECU and receiver

  • ID Registration
  • Initialization
  • Tire Position Identification

Tire Pressure Warning System

2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM (for Gasoline Model (for Type B)): PRECAUTION 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM (for Gasoline Model (for Type B)): PRECAUTION

NOTICE:

When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM (for Gasoline Model (for Type B)): DATA LIST / ACTIVE TEST

PROCEDURE

1. REMOVE ROOF SIDE INNER GARNISH LH

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; DOOR LOCK: DOOR CONTROL RECEIVER (for Hatchback): REMOVAL 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; DOOR LOCK: DOOR CONTROL RECEIVER (for Hatchback): REMOVAL

2. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:

  • Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.
  • If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.

(a) Remove the bolt.

(b) Disengage the 2 guides.

(c) Disconnect the connector to remove the tire pressure warning ECU and receiver.