| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM10000000274HL |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: MAINTENANCE: TIRE AND WHEEL: REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during wheel assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Tire |
ECU Data Initialization (When performing tire replacement after RoB code X2104 is output) |
Active Torque Split AWD System |
|
![2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 - ]; GF1A (TRANSFER / 4WD / AWD): ACTIVE TORQUE SPLIT AWD SYSTEM: CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. REMOVE WHEEL CAP (w/ Wheel Cap (except Bolt-On Cover Type))
(a) Remove the wheel cap.
2. REMOVE WHEEL ASSEMBLY
(a) w/o Lock Nut:
(1) Loosen the axle hub nuts approximately 90°.
(2) Lift up the vehicle and remove the axle hub nuts and wheel assembly.
(b) w/ Lock Nut:
(1) Loosen the lock nut approximately 90°.
(2) Loosen the axle hub nuts approximately 90°.
(3) Lift up the vehicle and remove the lock nut, axle hub nuts and wheel assembly.
3. REMOVE WHEEL CAP (w/ Wheel Cap (for Bolt-On Cover Type))
(a) Remove the wheel cap.
|
|