Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000274HL |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: MAINTENANCE: TIRE AND WHEEL: REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during wheel assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Tire
|
ECU Data Initialization (When performing tire replacement after RoB code X2104 is output)
|
Active Torque Split AWD System
|
|
PROCEDURE
1. REMOVE WHEEL CAP (w/ Wheel Cap (except Bolt-On Cover Type))
(a) Remove the wheel cap.
2. REMOVE WHEEL ASSEMBLY
(a) w/o Lock Nut:
(1) Loosen the axle hub nuts approximately 90°.
(2) Lift up the vehicle and remove the axle hub nuts and wheel assembly.
(b) w/ Lock Nut:
(1) Loosen the lock nut approximately 90°.
(2) Loosen the axle hub nuts approximately 90°.
(3) Lift up the vehicle and remove the lock nut, axle hub nuts and wheel assembly.
3. REMOVE WHEEL CAP (w/ Wheel Cap (for Bolt-On Cover Type))
(a) Remove the wheel cap.
|