Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000271XC |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Knobless Radio and Display Receiver): Sound cannot be Heard Sound Quality is Poor only when Replaying USB Storage Device or "iPod"; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] |
Sound cannot be Heard Sound Quality is Poor only when Replaying USB Storage Device or "iPod"
|
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.
Click here
PROCEDURE
1.
|
INSPECT ANTENNA CORD SUB-ASSEMBLY (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
|
(a) Disconnect the x5 radio and display receiver assembly connector.
(b) Disconnect the x4 No. 1 stereo jack adapter assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
x5-2(US1-) - x4-4(D-)
|
Always
|
Below 1 Ω
|
x5-3(US1+) - x4-1(D+)
|
Always
|
Below 1 Ω
|
x5-5(USG1) - x4-5(UJSS)
|
Always
|
Below 1 Ω
|
x5-2(US1-) or x4-4(D-) - Body ground
|
Always
|
10 kΩ or higher
|
x5-3(US1+) or x4-1(D+) - Body ground
|
Always
|
10 kΩ or higher
|
x5-5(USG1) or x4-5(UJSS) - Body ground
|
Always
|
10 kΩ or higher
|
OK
|
|
|
2.
|
CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
|
(a) Replace the No. 1 stereo jack adapter assembly with a new or known good one.
Click here
(b) Check if the problem symptom recurs.
Result
|
Proceed to
|
Malfunction disappears
|
A
|
Malfunction occurs
|
B
|
A |
|
END (NO. 1 STEREO JACK ADAPTER ASSEMBLY MALFUNCTION)
|
|