AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Knobless Radio and Display Receiver): DIAGNOSIS SYSTEM; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM10000000271WR
Model Year Start: 2023	Model: GR Corolla	Prod Date Range: [09/2022 - ]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Knobless Radio and Display Receiver): DIAGNOSIS SYSTEM; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]

DIAGNOSIS SYSTEM

CHECK FOR DTCs (USING SYSTEM CHECK MODE SCREEN)

HINT:

When system self-diagnosis DTCs cannot be output due to a malfunction that is preventing diagnosis mode from being started or the multi-display from displaying, read the DTCs using the GTS.

(a) Start diagnosis and display the "Service Menu" screen.

(b) Select "Failure Diagnosis" on the service menu screen to display the failure diagnosis screen.

System Check Mode Screen Description

Display	Content
*a: Device Name List	Displays the components names, including additional devices (the physical address is displayed if the name is unknown)
*b: Check Result	Displays the inspection result of connected devices
*c: Optional Device Name List	Displays the components names, including aftermarket devices
*d: Memory Clear	Delete current DTCs and confirmed DTCs (press and hold for 3 seconds or more)
*e: Recheck	Performs a check again

(1) Confirm that each of the following connected devices are displayed:

Name	Component	Connection Method
AVN	Radio and display receiver assembly	-
IF-BOX_USB	No.1 Stereo jack adapter assembly	USB

HINT:

When diagnosis starts, the system check mode screen is displayed and the check is performed.
System check mode displays the inspection results screen based on the response for each device during "system inspection instruction", "system inspection result demand", etc., and "Normal Diagnosis Notice", notifications.
The displayed screen is an example only. The actual device name displayed on the screen may differ depending on the connected device (dealer installed options, etc.).

(2) CHECK SYSTEM CHECK RESULTS (USB)

Check result	Meaning
*: When the "DETAIL" button is pressed, the system transitions to the unit check mode screen.
OK	No DTCs are stored
DETAIL (*)	DTCs are stored
NRES	No response of diagnosis information
Device name and/or system check result cannot be displayed for USB	No history of a device being registered to the system, and no response during the diagnosis check

(d) Unit Check Mode

(1) When "DETAIL" is displayed on the system check mode inspection results, the system transitions to the unit check mode screen when pressed.

(2) Confirm and record the DTCs

Unit Check Mode Screen Description

Display	Content
*a: Device name	Target device name
*b: History DTC	Displays stored DTCs (up to 6 items) for the target device
*c: Latest	An "X" is displayed for the target device when latest DTCs (latest malfunction in current trip) exist
*d: Confirm	An "X" is displayed for the target device when confirmed DTCs (diagnosis codes that have been confirmed up until the current time) exist
*e: Time of occurrence	Displays the time that the DTC was stored
*f: Code CLR	Clears DTC information of the target device and clears the display

NOTICE:

A maximum of 6 codes are stored for the radio and display receiver assembly. When it is suspected that more than 6 codes are output, confirm the DTCs using the GTS.

HINT:

Unit check mode screen is updated once per second.

CLEAR DTC (USING SYSTEM CHECK MODE SCREEN)

(a) Clear the DTCs

(1) Select "Code CLR" on the unit check mode screen (press and hold for 3 seconds or more) and clear the DTCs.

ENTER DIAGNOSTIC MODE

HINT:

When system self-diagnosis DTCs cannot be output due to a malfunction that is preventing diagnosis mode from being started or the multi-display from displaying, read the DTCs using the GTS.
Enter diagnostic mode by performing one of the following methods.

(a) Start method 1

(1) Using the GTS, display the diagnostic mode window.

Body Electrical > Navigation System > Utility

Tester Display
Diagnostic Mode

(2) When diagnosis starts, the "Service Menu" screen is displayed.

(b) Start method 2

(1) Ensure that the vehicle is stopped.

(2) Turn the ignition switch to ON.

(3) Turn off the multi-display.

(4) Turn off the audio of the radio and display receiver assembly.

(5) Flick the multi-display 5 times from left to right as shown in the illustration.

(6) Flick the multi-display 5 times from right to left as shown in the illustration.

HINT:

Make sure to complete the operation within 15 seconds of performing the initial flick from left to right.

(7) When diagnosis starts, the service menu screen is displayed.

HINT:

If diagnosis does not start due to a failed operation, turn the display on then off and perform the procedure from the start. (Only turning the audio of the radio and display receiver assembly from off to on is not a valid method)

DIAGNOSTIC MODE SCREEN TRANSITION

(a) Service Menu

CANCEL DIAGNOSTIC MODE

(a) Turn the ignition switch off

SERVICE MENU

HINT:

The service menu screen can be used to perform malfunction diagnosis for each device, confirm functions and information, and collect data.

(a) Failure Diagnosis

Failure Diagnosis Screen Display Contents

Display	Details	Proceed to
System Check	Display the names of devices connected to the system, and display current and confirmed DTCs as diagnosis results for those devices.
Diagnosis Recorder	"Bluetooth" connection history can be confirmed	-

HINT:

Each failure diagnosis screen is created by the radio and display receiver assembly.

(1) Diagnosis Recorder

Diagnosis Recorder Screen Description

Display	Details	Proceed to
Delete REC DATA	Recorded history data can be cleared	-
Recording ON/OFF	When performing a "Bluetooth" trace, the recorder function can be set to off	-
BT cmc Trace output	"Bluetooth" connection history can be confirmed

HINT:

Each diagnosis recorder screen is created by the radio and display receiver assembly.

(b) Function Check/Setting I

Function Check/Setting I Screen Description

Display	Content	Proceed to
Panel&Steering Switch	Checks the operation of the panel switch and steering switch
Touch Switch Check	Checks the operation of the touch switch of the multi-display
Microphone Check	Checks the connection status of the microphone to the radio and display receiver assembly
GNSS Check	Displays information regarding GNSS GNSS date and time settings Displays information regarding each sensor in the radio and display receiver assembly
Vehicle Signal	Performs an inspection of vehicle side signal received by the radio and display receiver assembly
HF Voice Quality Setting	HF Voice Quality Setting

HINT:

Each function check/setting I screen is created by the radio and display receiver assembly.

HINT:

The service information screen can be used to confirm information and read the memory.

Service Information Screen Description

Display	Content	Proceed to
Memory point backup	Performs memory read using the GTS	-
Version Information	Displays connected device version information	-
APP distribution Info	Displays in-vehicle device ID, device identification ID, distribution application PF version, registered user information, etc.	-

HINT:

Each service information screen is created by the radio and display receiver assembly.

(d) Product Information

Product Information Screen Description

Display	Content
VIN	Displays VIN
Product Number (AVN)	Displays serial number of the radio and display receiver assembly
Product Number (Ext Box)	This item is displayed but is not used
HU ID	Displays serial number of the radio and display receiver assembly
Chip serial No. (AVN)	Displays IC serial number of the radio and display receiver assembly
Chip serial No. (Ext Box)	This item is displayed but is not used
DCM IMEI	Displays telematics transceiver IMEI
DCM ICCID	Displays telematics transceiver ICCID
DCM MSISDN	Displays telematics transceiver MSISDN
DCM Contract status	Displays telematics transceiver contract status
HELPNET ID	Displays telematics transceiver HELPNET ID