Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000271K9 |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System TMC Made): C055795; Left Rear Wheel Speed Sensor Incorrect Component Installed; 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022] |
DTC
|
C055795
|
Left Rear Wheel Speed Sensor Incorrect Component Installed
|
DESCRIPTION
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C055795
|
Left Rear Wheel Speed Sensor Incorrect Component Installed
|
The rear speed sensor LH is installed incorrectly.
|
Rear Speed Sensor LH (rear axle hub and bearing assembly LH)
|
PROCEDURE
1.
|
CHECK PART NUMBER (REAR SPEED SENSOR LH)
|
(a) Check that the rear speed sensor LH is installed.
OK:
Proper rear speed sensor LH is installed.
NOTICE:
If it is necessary to remove components in order to check the rear speed sensor LH, follow the relevant installation and removal procedures and precautions for those components.
HINT:
The rear speed sensor LH and rear speed sensor rotor LH are incorporated into the rear axle hub and bearing assembly LH.
If the rear speed sensor LH and rear speed sensor rotor LH need to be replaced, replace the rear axle hub and bearing assembly LH.
NG |
|
REPLACE REAR AXLE HUB AND BEARING ASSEMBLY LH
for Double Wishbone Type Suspension: Click here
for Torsion Beam Type Suspension: Click here
|
OK
|
|
|
(a) Clear the DTCs.
Chassis > Brake > Clear DTCs
(b) Turn the ignition switch off.
NEXT
|
|
|
(a) Based on the Freeze Frame Data and interview with the customer, attempt to reproduce the conditions when the malfunction occurred.
(b) Check if the same DTC is output.
Chassis > Brake > Trouble Codes
HINT:
The rear speed sensor LH and rear speed sensor rotor LH are incorporated into the rear axle hub and bearing assembly LH.
If the rear speed sensor LH and rear speed sensor rotor LH need to be replaced, replace the rear axle hub and bearing assembly LH.
Result
|
Proceed to
|
DTC C055795 is not output.
|
A
|
DTC C055795 is output.
|
B
|
B |
|
REPLACE REAR AXLE HUB AND BEARING ASSEMBLY LH
for Double Wishbone Type Suspension: Click here
for Torsion Beam Type Suspension: Click here
|
|