Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM10000000270ZM
Model Year Start: 2023 Model: Corolla Hatchback Prod Date Range: [09/2022 - 11/2022]
Title: EC65 (MANUAL TRANSMISSION / TRANSAXLE): TRANSMISSION CONTROL CABLE: INSTALLATION; 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]

INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Pass the transmission control cable assembly into the vehicle and install the transmission control cable assembly to the vehicle body with the 2 nuts.

Torque:

6.0 N·m {61 kgf·cm, 53 in·lbf}

(b) Engage the guide and connect the transmission control cable assembly to the vehicle body.

(c) Install the nut.

Torque:

6.0 N·m {61 kgf·cm, 53 in·lbf}

(d) Install the transmission control cable assembly to the control cable bracket assembly with 2 new clips (B).

NOTICE:

Make sure that the paint marks on the transmission control cable assembly are aligned with the slits in the control cable bracket assembly before installing the clips.

*a

Paint Mark

(e) Connect the transmission control cable assembly to the manual transaxle assembly with the 2 clips (A).

(f) Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, press in the stopper until it makes 2 "click" sounds.

*a

Nut

*b

Stopper

*c

Turn

*d

Push

(g) Install the transmission control shift cable to the shift lever retainer, check that the position of the spring is the same as (A) shown in the illustration, and press in the stopper.

NOTICE:

Do not forcibly pull the transmission control cable assembly into the cabin.

HINT:

If the stopper cannot be pressed in, slightly rotate the nut clockwise and then press in the stopper.

*1

Shift Lever Retainer (Floor Shift Lever Assembly)

*a

Nut

*b

Stopper

*c

Spring

*d

Push

(h) Install the transmission control select cable to the shift lever retainer, check that the position of the spring is the same as (A) shown in the illustration, and press in the stopper.

NOTICE:

Do not forcibly pull the transmission control cable assembly into the cabin.

HINT:

If the stopper cannot be pressed in, slightly rotate the nut clockwise and then press in the stopper.

(i) Connect the transmission control shift cable to the floor shift lever assembly.

(j) Connect the transmission control select cable to the floor shift lever assembly with the clip.

2. ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; EC65 (MANUAL TRANSMISSION / TRANSAXLE): TRANSMISSION CONTROL CABLE: ADJUSTMENT+

3. INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR

(a) Install the front No. 1 floor heat insulator to the vehicle body with the 3 nuts.

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

4. INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (INTAKE / EXHAUST): EXHAUST PIPE: INSTALLATION

5. INSTALL FRONT FLOOR CENTER BRACE

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (INTAKE / EXHAUST): EXHAUST PIPE: INSTALLATION+

6. INSTALL BATTERY CLAMP SUB-ASSEMBLY

Click here 2023 MY Corolla [09/2022 - 11/2022]; 2ZR-FAE (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

7. CONNECT ENGINE WIRE

(a) Connect the engine wire to the battery clamp sub-assembly with the bolt and nut.

Torque:

7.0 N·m {71 kgf·cm, 62 in·lbf}

8. INSTALL ECM

Click here 2023 MY Corolla [09/2022 - 11/2022]; 2ZR-FAE (ENGINE CONTROL): ECM: INSTALLATION+

9. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

Click here 2023 MY Corolla [09/2022 - 11/2022]; 2ZR-FAE (ENGINE CONTROL): ECM: INSTALLATION+

10. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; MAINTENANCE: 2ZR-FAE AIR CLEANER FILTER ELEMENT: INSTALLATION+

11. INSTALL INLET NO. 1 AIR CLEANER

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (COOLING): COOLING FAN MOTOR: INSTALLATION+

12. INSTALL RADIATOR SUPPORT OPENING COVER

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; EXTERIOR PANELS / TRIM: FRONT BUMPER (for Sedan without Illumination): INSTALLATION+

13. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (ENGINE CONTROL): THROTTLE BODY: INSTALLATION+

14. INSTALL CONSOLE BOX ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV [09/2022 - 11/2022]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): INSTALLATION

15. INSTALL BATTERY

Click here 2023 MY Corolla [09/2022 - 11/2022]; MAINTENANCE: 2ZR-FAE BATTERY: INSTALLATION

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click here 2023 MY Corolla [09/2022 - 11/2022]; MAINTENANCE: 2ZR-FAE BATTERY: INSTALLATION+

17. INSPECT FOR EXHAUST GAS LEAK

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (INTAKE / EXHAUST): EXHAUST PIPE: INSTALLATION+

18. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; SETUP: WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL: AUTOMATIC LEARNING CHART