INSTALLATION

PROCEDURE

1. INSTALL NO. 2 ECM BRACKET

(a) Install the No. 2 ECM bracket to the ECM with the 2 screws.

Torque:

4.5 N·m {46 kgf·cm, 40 in·lbf}

2. INSTALL NO. 1 ECM BRACKET

(a) Install the No. 1 ECM bracket to the ECM with the 2 screws.

Torque:

4.5 N·m {46 kgf·cm, 40 in·lbf}

3. INSTALL ECM

(a) Engage the guide to install the ECM.

NOTICE:

If the ECM has been struck or dropped, replace it.

(b) Install the bolt and nut.

Torque:

Bolt :

12.5 N·m {127 kgf·cm, 9 ft·lbf}

Nut :

8.0 N·m {82 kgf·cm, 71 in·lbf}

(c) Connect the 2 ECM connectors and lower the 2 lock levers. NOTICE: When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors. Be sure to securely connect the ECM connectors.

(d) Engage the 2 claws to connect the engine wire to the No. 1 engine room relay block and No. 1 junction block assembly.

(e) Connect the 3 connectors to the No. 1 engine room relay block and No. 1 junction block assembly.

(f) Engage the 2 guides and claw to install the No. 1 relay block cover to the No. 1 engine room relay block and No. 1 junction block assembly.

4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

(a) Engage the guide to install the air cleaner case sub-assembly.

(b) Install the 2 bolts.

Torque:

4.0 N·m {41 kgf·cm, 35 in·lbf}

5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Click here

6. INSTALL INLET NO. 1 AIR CLEANER

Click here

7. INSTALL RADIATOR SUPPORT OPENING COVER

Click here

8. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click here

10. PERFORM INITIALIZATION

Click here

11. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click here