Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000270OL |
Model Year Start: 2023 |
Model: Corolla Hatchback |
Prod Date Range: [09/2022 -
] |
Title: M20A-FKS (STARTING): STARTER: INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback [09/2022 - ] |
INSTALLATION
PROCEDURE
1. INSTALL STARTER ASSEMBLY
(a) Engage the 2 claws and install the starter terminal to the starter assembly cover (base).
(b) Install the starter terminal to the starter assembly with the nut.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
(c) Install the starter assembly cover (cover A) to the starter assembly cover (base).
(d) Install the starter assembly with the 2 bolts.
Torque:
46 N·m {469 kgf·cm, 34 ft·lbf}
(e) Connect the engine wire with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(f) Connect the engine wire to terminal 30 with the nut.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
(g) Engage the claw and install the starter assembly cover (cover B) to the starter assembly cover (base) and starter assembly cover (cover A).
|
|
(h) Connect the starter assembly connector.
2. INSTALL FLYWHEEL HOUSING SIDE COVER
(a) Align the protrusion with the cylinder block sub-assembly and engage the claw as shown in the illustration to install the flywheel housing side cover.
NOTICE:
-
Make sure the claw makes a click sound, indicating that it fits tightly.
-
Replace the flywheel housing side cover with a new one if the claw does not fit tightly or is deformed.
|
|
3. INSTALL INTAKE MANIFOLD
Click here
4. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Click here
6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
|