ADVANCED DRIVER ASSISTANCE SYSTEM: FRONT RADAR SENSOR SYSTEM (for TMC Made): VEHICLE CONTROL HISTORY (RoB); 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022

VEHICLE CONTROL HISTORY (RoB)

NOTICE:

Vehicle control history may be recorded due to the replacement or repair of related parts.
When checking the Vehicle Control History, make sure to record the output codes. Then, clear the Vehicle Control History (RoB) and check it again.

CHECK VEHICLE CONTROL HISTORY (FRONT RADAR SENSOR SYSTEM)

(a) Read the Vehicle Control History (RoB) according to the display on the GTS.

Body Electrical > Front Radar Sensor > Utility

Tester Display

Vehicle Control History (RoB)

Multi-information Display

Code

Tester Display

Description

Diagnostic Note

System Malfunction Visit Your Dealer

X2023

Front Radar Sensor Optical Axis Not Adjusted

History of millimeter wave radar sensor assembly beam axis not being adjusted.

If this Vehicle Control History code is stored, clear the Vehicle Control History (RoB) after performing front beam axis adjustment, and then check that this code is not output again.

HINT:

Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

Triangle Target:

Flat Surface Target:

Driving Adjustment:

System Stopped Front Radar In Self Calibration See Owner's Manual

X2024

Front Radar Sensor Temporary Unavailable (Vertical Direction Optical Axis Misalignment)

History of millimeter wave radar sensor assembly beam axis misalignment (vertical).

If this Vehicle Control History code is stored, clear the Vehicle Control History (RoB) after performing front beam axis adjustment, and then check that this code is not output again.

HINT:

Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

Triangle Target:

Flat Surface Target:

Driving Adjustment:

System Stopped Front Radar In Self Calibration See Owner's Manual

X2025

Front Radar Sensor Temporary Unavailable (Horizontal Direction Optical Axis Misalignment)

History of millimeter wave radar sensor assembly beam axis misalignment (horizontal).

If this Vehicle Control History code is stored, clear the Vehicle Control History (RoB) after performing front beam axis adjustment, and then check that this code is not output again.

HINT:

Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

Triangle Target:

Flat Surface Target:

Driving Adjustment:

System Stopped Front Radar Sensor Blocked Clean Radar Sensor

X2026

Front Radar Sensor Dirt

History of system operation being temporarily suspended due to millimeter wave radar sensor assembly not being able to detect objects.

Confirm that the following condition is met:
There is no foreign matter such as dirt on or around the millimeter wave radar sensor assembly.
- A cover other than the dedicated millimeter wave radar sensor cover is not installed.
- There is no dirt on the front emblem or millimeter wave radar sensor assembly.
- An accessory, such as bull bars, a grille guard, etc., which interferes with millimeter radio waves is not installed.
- There is no sticker or coating applied to the dedicated radar sensor cover.
- There is no foreign matter between the radar and radar sensor cover.
If any foreign matter is found around the millimeter wave radar sensor assembly, remove it.
Turn the ignition switch off.
Turn the ignition switch ON.
Check that "System Stopped Front Radar Sensor Blocked Clean Radar Sensor" is no longer displayed on the multi-information display.
If "System Stopped Front Radar Sensor Blocked Clean Radar Sensor" is still displayed on the multi-information display, perform beam axis adjustment.
HINT:

Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

Triangle Target:

Flat Surface Target:

Driving Adjustment:

Cause:

There is foreign matter such as dirt on or around the millimeter wave radar sensor assembly.

System Stopped Front Radar Sensor Out of Temperature Range Wait until Normal Temperature

X2027

Front Radar Sensor Outside Guaranteed Operating Temperature

History of system operation being temporarily suspended due to the millimeter wave radar sensor assembly being excessively hot or cold.

Cool down or warm up the area surrounding the millimeter wave radar sensor assembly.

Cause:

The following millimeter wave radar sensor assembly conditions are met:
- After being subjected to an extremely cold environment, the area around the millimeter wave radar sensor assembly is -30°C (-22°F) or less.
- After being subjected to an extremely hot environment, the area around the millimeter wave radar sensor assembly is 70°C (158°F) or more.

System Stopped See Owner's Manual

X2028

Front Radar Sensor Outside Guaranteed Operating Voltage

History of system operation being temporarily suspended due to millimeter wave radar sensor assembly power source voltage being excessively high or low.

If this Vehicle Control History code is output, clear the Vehicle Control History (RoB), drive the vehicle at 5 km/h (3 mph) or more and then check if this Vehicle Control History code is output again.
If output again, check if the voltage between terminals IGB and SGND of the millimeter wave radar sensor assembly is within the specified range.

Cause:

The following millimeter wave radar sensor assembly conditions are met:
- for Gasoline Model:
  1. The input voltage decreases to approximately 6 V or less directly after the engine is started.
- for HV Model:
  1. The input voltage decreases to approximately 6 V or less directly after the hybrid system starts.

X2076

Wiper Malfunction

The millimeter wave radar sensor assembly received a wiper system malfunction signal from the main body ECU (multiplex network body ECU).

Refer to How to Proceed with Troubleshooting in Wiper and Washer System.

X2077

Ambient Temperature Sensor Circuit

The millimeter wave radar sensor assembly received an ambient temperature sensor malfunction signal from the air conditioning amplifier assembly.

Refer to How to Proceed with Troubleshooting in Air Conditioning System.

for Gasoline Model with Automatic Air Conditioning System:

for Gasoline Model with Manual Air Conditioning System:

for HV Model:

CLEAR VEHICLE CONTROL HISTORY (FRONT RADAR SENSOR SYSTEM)

NOTICE:

By performing this procedure, all stored Vehicle Control History will be cleared.

(a) According to the display on the GTS, clear the Vehicle Control History (RoB).

Body Electrical > Front Radar Sensor > Utility

Tester Display

Vehicle Control History (RoB)

CHECK VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)

(a) Part of the control history can be confirmed using the Vehicle Control History.

Click here

2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for TMC Made): VEHICLE CONTROL HISTORY