| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM10000000270KT |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: ADVANCED DRIVER ASSISTANCE SYSTEM: FRONT CAMERA SYSTEM (for TMC Made): C1AA800; Front Recognition Camera Optical Axis Misalignment Malfunction; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
|
DTC |
C1AA800 |
Front Recognition Camera Optical Axis Misalignment Malfunction |
DESCRIPTION
The forward recognition camera monitors its optical axis status. If it determines that the optical axis alignment has become misaligned, it will store DTC C1AA800.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
DTC Output from |
Priority |
|---|---|---|---|---|---|
|
C1AA800 |
Front Recognition Camera Optical Axis Misalignment Malfunction |
When a misalignment of the forward recognition camera is detected |
|
Front Recognition Camera |
A |
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
-
When the forward recognition camera has been replaced with a new one, make sure to clear all stored vehicle control history of each system and the forward recognition camera beam axis alignment data.
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here
![2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; ADVANCED DRIVER ASSISTANCE SYSTEM: FRONT CAMERA (for TMC Made): TARGET ADJUSTMENT(ONE TIME RECOGNITION)](/t3Portal/stylegraphics/info.gif)
Driving Adjustment: Click here
Camera Axis Adjustment Value Write: Click here
-
If the forward recognition camera has been replaced with a new one, make sure to perform Software Version Confirmation.
Click here
- When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the forward recognition camera may not operate properly due to a difference in the transmissivity or black ceramic border.
- Forward recognition camera optical axis may deviate if the vehicle is driven on a banked road, such as a racetrack. This deviation can be corrected by driving the vehicle on a normal road for a while.
- Forward recognition camera optical axis may deviate when the vehicle is overloaded or the wheel alignment (toe-in) is incorrect. The forward recognition camera optical axis can be corrected by decreasing the load on the vehicle or adjusting the toe-in.
PROCEDURE
|
1. |
CHECK FORWARD RECOGNITION CAMERA INSTALLATION |
HINT:
Click here
HINT:
If there is deformation or deviation in the forward recognition camera installation bracket, replace the windshield glass.
OK:
No deformation or deviation in forward recognition camera installation bracket.
| NG |
|
|
|
2. |
CHECK VEHICLE OPERATING CONDITION |
HINT:
Check if a condition which caused the forward recognition camera optical axis to become temporarily misaligned existed, such as if the vehicle was overloaded, towed or modified.
OK:
Vehicle was not overloaded, towed or modified.
| NG |
|
|
|
3. |
CHECK WHEEL ALIGNMENT (TOE) |
-
for Front Wheel Alignment: Click here
-
for Rear Wheel Alignment (Double Wishbone Type Suspension): Click here
-
for Rear Wheel Alignment (Torsion Beam Type Suspension): Click here
OK:
Front and rear wheels are not misaligned (toe)
| NG |
|
|
|
4. |
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT |
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here
Driving Adjustment: Click here
Camera Axis Adjustment Value Write: Click here
|
|
5. |
CLEAR DTC |
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
6. |
ADJUST WHEEL ALIGNMENT (TOE) |
-
for Front Wheel Alignment: Click here
-
for Rear Wheel Alignment (Double Wishbone Type Suspension): Click here
-
for Rear Wheel Alignment (Torsion Beam Type Suspension): Click here
|
|
7. |
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT |
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here
Driving Adjustment: Click here
Camera Axis Adjustment Value Write: Click here
|
|
8. |
CLEAR DTC |
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
9. |
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT |
(a) Return the vehicle to normal operating conditions.
(b) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here
Driving Adjustment: Click here
Camera Axis Adjustment Value Write: Click here
|
|
10. |
CLEAR DTC |
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
11. |
REPLACE WINDSHIELD GLASS |
HINT:
Click here
|
|
12. |
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT |
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here
Driving Adjustment: Click here
Camera Axis Adjustment Value Write: Click here
|
|
13. |
CLEAR DTC |
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
|