INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

When replacing the battery, use a new battery of the same dimensions and same capacity or more from the same class at a 20-hour rate.

PROCEDURE

1. INSTALL AUXILIARY BATTERY

(a) Install the auxiliary battery.

(b) Set the No. 2 battery clamp as shown in the illustration.

Install in this Direction

(c) Install the bolt.

Torque:

15.4 N·m {157 kgf·cm, 11 ft·lbf}

(d) Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

(e) Close the fusible link cover.

2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

(a) Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

3. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click here