| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000026ZDX |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM (w/ Safe Exit Assist Function): CUSTOMIZE PARAMETERS; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
CUSTOMIZE PARAMETERS
CUSTOMIZE BLIND SPOT MONITOR SYSTEM
(a) Customizing with the GTS
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Turn the ignition switch to ON.
(2) Turn the blind spot monitor system on.
(3) Enter the following menus: Body Electrical / Blind Spot Monitor "B" or Blind Spot Monitor "A" / Utility
(4) Select the setting by referring to the table below.
Blind Spot Monitor
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
BSM Function |
Switches the BSM function on and off. |
Valid |
$00:Valid,$01:Invalid |
Blind Spot Monitor Sensor LH (B) |
|
RCTA Function |
Switches the RCTA function on and off. |
Valid |
$00:Valid,$01:Invalid |
Blind Spot Monitor Sensor LH (B) |
|
SEA Function |
Switches the safe exit assist system on and off. |
Effectively |
$00:Valid,$01:Invalid |
Blind Spot Monitor Sensor LH (B) |
|
SEA Detection Sensitivity |
Sets the sensitivity of the notification of the safe exit assist system. |
Middle |
$01:Low,$02:Middle,$03:High |
Blind Spot Monitor Sensor LH (B) |
|
RCTA Buzzer Volume Setting |
Sets the volume of the RCTA (meter buzzer). |
Medium |
$01:Small,$03:Medium,$05:Large |
Blind Spot Monitor Sensor LH (B) |
(b) Customizing with the multi-information display
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
BSM
|
Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
BSM |
Switches the BSM function on and off. |
ON |
ON/OFF |
Blind Spot Monitor Sensor LH (B) |
|
Support timing |
Sets the notification timing for vehicles approaching from behind the vehicle. |
Middle |
Early/Middle/Late |
Blind Spot Monitor Sensor LH (B) |
|
Brightness |
Sets the brightness of the indicators in the outer rear view mirror assemblies. |
Bright |
Dim/Bright |
Blind Spot Monitor Sensor LH (B) |
RCTA
|
Display |
Measurement Item |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
RCTA |
Switches the RCTA function on and off. |
ON |
ON/OFF |
Blind Spot Monitor Sensor LH (B) |
|
Parking Assist System Volume |
Adjusts the volume for the RCTA buzzer (meter buzzer). |
Medium |
Small/Medium/Large |
Blind Spot Monitor Sensor LH (B) |
SEA (Safe Exit Assist)
|
Display |
Measurement Item |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Safe Exit Assist |
Turns the safe exit assist system ON/OFF. |
ON |
ON/OFF |
Blind Spot Monitor Sensor LH (B) |
|
Sensitivity |
Sets the sensitivity of the notification of the safe exit assist system. |
Medium |
3(Early),2(Middle),1(Late) |
Blind Spot Monitor Sensor LH (B) |
|
Mirror indicate |
Switches the outer rear view mirror indicator on and off. |
ON |
ON/OFF |
Blind Spot Monitor Sensor LH (B) |
|
|