HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for TMC Made, and Gasoline Model, with Manual Air Conditioning System for Electrical Control Type): B14037F; Front Air Outlet Damper Control Servo Motor Actuator Stuck Off; 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM1000000026Z9R
Model Year Start: 2023	Model: GR Corolla	Prod Date Range: [09/2022 - 11/2022]
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for TMC Made, and Gasoline Model, with Manual Air Conditioning System for Electrical Control Type): B14037F; Front Air Outlet Damper Control Servo Motor Actuator Stuck Off; 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]

DTC

B14037F

Front Air Outlet Damper Control Servo Motor Actuator Stuck Off

DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position.

The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air outlet damper to the appropriate position, which controls the air outlet switching.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

B14037F

Front Air Outlet Damper Control Servo Motor Actuator Stuck Off

Diagnosis Condition:

No. 1 air conditioning radiator damper servo sub-assembly operating

Malfunction:

Damper servo operation request signals are output but the damper position sensor value does not change.
Damper servo operation request signals are output but the damper position sensor value is abnormal.

Detection Time:

Continuously for 30 seconds or more

No. 1 air conditioning radiator damper servo sub-assembly
Air conditioning harness assembly
Air conditioning radiator assembly

Memorized

DTC Detection Condition Combination Table

		Vehicle Condition
		Pattern 1	Pattern 2
Diagnosis Condition	No. 1 air conditioning radiator damper servo sub-assembly operating	○	○
Malfunction	Damper servo operation request signals are output but the damper position sensor value does not change.	○	-
Malfunction	Damper servo operation request signals are output but the damper position sensor value is abnormal.	-	○
Detection Time		Continuously for 30 seconds or more	Continuously for 30 seconds or more
Trip Count		1 trip	1 trip

HINT:

If the conditions of either of these patterns are detected, a DTC will be stored.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

This DTC is also output for the damper link, damper lock, etc. Before performing inspection, perform servomotor initialization and check that there are no mechanical malfunctions.
Click here
This DTC is also output when servomotor initialization has failed. When servomotor initialization has failed, repair any malfunctions and perform servomotor initialization again.
Click here

PROCEDURE

1.	CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)

(a) Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

Click here

OK:

No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

REINSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

2.	CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)

(a) Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.

REMOVE PINCHED WIRE HARNESS

3.	CHECK AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

(a) Remove the No. 1 air conditioning radiator damper servo sub-assembly.

Click here

(b) Operate the dampers by hand.

OK:

The dampers are easily operated by hand.

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

REPAIR OR REPLACE AIR CONDITIONING RADIATOR ASSEMBLY