| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000026Z42 |
| Model Year Start: 2023 | Model: Corolla | Prod Date Range: [09/2022 - ] |
| Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for HV Model): B147496; A/C Inverter Component Internal Failure; 2023 - 2025 MY Corolla Corolla HV [09/2022 - ] | ||
|
DTC |
B147496 |
A/C Inverter Component Internal Failure |
DESCRIPTION
If abnormal current in the A/C inverter output high voltage output circuit or a malfunction of temperature sensor in the compressor with motor assembly is detected, compressor control will be stopped and this DTC will be stored.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Memory |
|---|---|---|---|---|
|
B147496 |
A/C Inverter Component Internal Failure |
Diagnosis Condition:
Malfunction:
Detection Time:
|
Compressor with motor assembly |
Memorized |
DTC Detection Condition Combination Table
|
Vehicle Condition |
|||
|---|---|---|---|
|
Pattern 1 |
Pattern 2 |
||
|
Diagnosis Condition |
Ignition switch ON |
○ |
○ |
|
Malfunction |
Compressor with motor assembly internal malfunction (A/C inverter output system current detection circuit) |
○ |
- |
|
Compressor with motor assembly internal malfunction (A/C inverter overheat detection system thermistor) |
- |
○ |
|
|
Detection Time |
- |
- |
|
|
Trip Count |
1 trip |
1 trip |
|
HINT:
If the conditions of either of these patterns are detected, a DTC will be stored.
CAUTION / NOTICE / HINT
CAUTION:
-
Before inspecting the high-voltage system, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
Click here
![2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
-
Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.
Click here
NOTICE:
-
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
-
Before disconnecting battery:
Click here
-
Automatic learning chart:
Click here
-
Before disconnecting battery:
-
The hybrid control system and air conditioning system output DTCs separately. Perform troubleshooting for the hybrid control system first if DTCs for both systems are output simultaneously.
Click here
-
The air conditioning system uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the air conditioning system after confirming that the communication systems are functioning properly.
Click here
PROCEDURE
|
1. |
REPLACE COMPRESSOR WITH MOTOR ASSEMBLY |
(a) Replace the compressor with motor assembly.
Click here
NOTICE:
If this DTC is output even once, replace the compressor with motor assembly as an internal malfunction has occurred.
| NEXT |
|
END |
|
|