Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000026YIZ
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: LIGHTING (INT): LIGHTING SYSTEM (except TMMMS Made): OPERATION CHECK; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

OPERATION CHECK

INSPECT ILLUMINATED ENTRY SYSTEM OPERATION

NOTICE:

Perform this inspection with the customize parameters at the initial settings.

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; LIGHTING (INT): LIGHTING SYSTEM (except TMMMS Made): CUSTOMIZE PARAMETERS

HINT:

Perform this inspection with the door linked switch of the map light assembly on and the switch of the No. 1 room light assembly in the DOOR position.

Control

Outline

Lights that Operate

Actuation Area-linked*1

When a registered key is brought within any vehicle exterior detection area around the doors, the lights that operate turn on.
  • Map Light Assembly
  • No. 1 Room Light Assembly

Door Lock/Unlock-linked

(When entering the vehicle)

In the above situation, the lights listed to the right illuminate when any door is unlocked.
  • Map Light Assembly
  • No. 1 Room Light Assembly

Door Open/Close-linked

(When entering the vehicle)

In the above situation, the lights listed to the right illuminate when any door is opened.
  • Map Light Assembly
  • No. 1 Room Light Assembly
  • Push Start Switch Illumination*1

Brake-linked

In the above situation, the lights listed to the right illuminate when the brake pedal is depressed.
  • Full illumination
    • Map Light Assembly
    • No. 1 Room Light Assembly
  • Blinking
    • Push Start Switch Illumination*1

Push Start Switch-linked*1

In the above situation, the lights listed to the right illuminate when the ignition switch is turned from off or ACC to ON.

Push Start Switch Illumination*1

Shift Position-linked*2

In the above situation, the lights listed to the right illuminate when the shift state is changed to other than P.

Push Start Switch Illumination*1

IG ON → OFF

(When exiting the vehicle)

In the above situation, the lights listed to the right illuminate when the ignition switch is turned from ON to off or ACC.
  • Map Light Assembly
  • No. 1 Room Light Assembly
  • Push Start Switch Illumination*1

Door Lock/Unlock-linked

(When exiting the vehicle)

In the above situation, the lights listed to the right dimly illuminate when any door is locked for approximately 7.5 seconds, or until the electrical key transmitter is carried outside of the detection area, and then turn off.
  • Map Light Assembly
  • No. 1 Room Light Assembly

Delay

When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:

  • An actuation area-linked function is used.*1
  • The door unlock-linked function is active.
  • Any door is opened and then all doors are closed when the ignition switch is off.
  • The ignition switch is turned from ACC or ON to off when all doors are closed.
  • Map Light Assembly
  • No. 1 Room Light Assembly

When approximately 40 seconds elapse after any of the following conditions is met, the lights that operate turn off:

  • Any front door is opened and then front doors are closed when the ignition switch is off.
  • The ignition switch is turned from on (ACC) or on (IG) to off when all doors are closed.

Push Start Switch Illumination*1
  • *1: w/ Smart Key System
  • *2: for CVT

INSPECT BATTERY SAVING CONTROL OPERATION

(a) The operations and conditions of this control are described below.

Control

Condition

Lights that Operate

Battery Saving

When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.

HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

  • Any door is opened and closed.
  • Any door is unlocked.
  • The key enters any exterior actuation area.*
  • Map Light Assembly
  • No. 1 Room Light Assembly
  • No. 1 Luggage Compartment Light Assembly

When 20 minutes elapse after the ignition switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.

HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

  • Any door is opened and closed.
  • Any door is unlocked.
  • The key enters any exterior actuation area.*

Push Start Switch Illumination*
  • *: w/ Smart Key System