Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000026XS0
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): INPUT SHAFT: INSPECTION; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]

INSPECTION

PROCEDURE

1. INSPECT INPUT SHAFT

(a) Check the input shaft for wear and damage.

(b) Using a dial indicator, measure the input shaft runout.

Maximum Runout:

0.01 mm (0.000394 in.)

If the runout exceeds the maximum, replace the input shaft.

(c) Using a micrometer, measure the outer diameter of the input shaft journal surface.

Standard:

Measured Part

Outer Diameter mm (in.)

A

30.008 to 30.020 (1.181 to 1.182)

B

32.002 to 32.018 (1.260 to 1.261)

If the outer diameter is below the minimum, replace the input shaft.