Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000026XRV
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE UNIT: DISASSEMBLY; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]

DISASSEMBLY

PROCEDURE

1. REMOVE NO. 1 CLUTCH HOUSING COVER

(a) Remove the No. 1 clutch housing cover from the front transaxle case.

2. REMOVE RELEASE CYLINDER BLEEDER PLUG CAP

(a) Remove the release cylinder bleeder plug cap from the release cylinder bleeder plug.

3. REMOVE RELEASE CYLINDER BLEEDER PLUG

(a) Remove the release cylinder bleeder plug from the clutch release bleeder sub-assembly.

4. REMOVE CLUTCH RELEASE BLEEDER SUB-ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; CLUTCH: CLUTCH UNIT (for EA67F / EA68F): REMOVAL+ 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; CLUTCH: CLUTCH UNIT (for EA67F / EA68F): REMOVAL+

5. REMOVE CLUTCH RELEASE BEARING PLATE

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; CLUTCH: CLUTCH UNIT (for EA67F / EA68F): INSTALLATION+

6. REMOVE CLUTCH RELEASE CYLINDER WITH BEARING ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; CLUTCH: CLUTCH UNIT (for EA67F / EA68F): REMOVAL+ 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; CLUTCH: CLUTCH UNIT (for EA67F / EA68F): REMOVAL+

7. REMOVE BLEEDER CLUTCH RELEASE TUBE

Click here 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; CLUTCH: CLUTCH UNIT (for EA67F / EA68F): REMOVAL+ 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; CLUTCH: CLUTCH UNIT (for EA67F / EA68F): REMOVAL+

8. REMOVE CONTROL CABLE BRACKET ASSEMBLY

(a) Remove the 3 bolts and control cable bracket assembly from the manual transmission case.

9. REMOVE SELECTING BELL CRANK ASSEMBLY

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): SHIFT AND SELECT LEVER SHAFT: DISASSEMBLY+

10. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY

(a) Using SST, remove the back-up light switch assembly and gasket from the manual transmission case.

SST: 09816-30010

11. REMOVE NEUTRAL POSITION SWITCH

(a) Using SST, remove the neutral position switch and gasket from the manual transmission case.

SST: 09816-30010

12. REMOVE TEMPERATURE SENSOR

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE OIL TEMPERATURE SENSOR: REMOVAL+

13. REMOVE TRANSMISSION REVOLUTION SENSOR

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): SPEED SENSOR: REMOVAL+

14. REMOVE NO. 1 LOCK BALL ASSEMBLY

(a) Remove the No. 1 lock ball assembly from the manual transmission case.

15. REMOVE NO. 2 LOCK BALL ASSEMBLY

(a) Remove the No. 2 lock ball assembly from the manual transmission case.

16. REMOVE SHIFT GATE PIN

(a) Remove the shift gate pin from the manual transmission case.

17. REMOVE SHIFT AND SELECT LEVER ASSEMBLY

(a) Remove the 4 bolts and shift and select lever assembly from the manual transmission case.

18. REMOVE SHIFT AND SELECT LEVER SHAFT STRAIGHT PIN

(a) While pressing in the shift and select lever shaft straight pin as far as it will go, pull out the shift and select lever shaft straight pin to remove it.

*a

Press and Hold

*b

Pull out the shift and select lever shaft straight pin.

(b) Remove the shift and select lever shaft straight pin and spring.

19. REMOVE SHIFT ARM PIVOT O-RING

(a) Remove the shift arm pivot O-ring from the shift and select lever shaft straight pin.

20. REMOVE MANUAL TRANSMISSION FILLER PLUG

(a) Remove the manual transmission filler plug and gasket from the manual transmission case.

21. REMOVE DRAIN PLUG

(a) Remove the drain plug and gasket from the manual transmission case.

22. FIX MANUAL TRANSAXLE ASSEMBLY

(a) Place the manual transaxle assembly on wooden blocks.

*a

Wooden Block

23. REMOVE SHIFT DETENT BALL

(a) Using a 6 mm hexagon wrench, remove the 4 detent ball plugs from the front transaxle case.

(b) Using a Magnet Hand, remove the 4 shift detent ball compression spring seats, 4 shift detent ball compression springs and 4 shift detent balls from the front transaxle case.

24. REMOVE REVERSE IDLER GEAR SHAFT BOLT

(a) Remove the reverse idler gear shaft bolt and gasket from the manual transmission case.

25. REMOVE MANUAL TRANSMISSION CASE PLUG

(a) Using SST and 27 mm straight hexagon, remove the manual transmission case plug from the manual transmission case.

SST: 09816-30010

26. REMOVE MANUAL TRANSMISSION CASE

(a) Remove the 8 bolts from the front transaxle case side.

(b) Remove the 10 bolts from the manual transmission case side.

(c) Using snap ring pliers, keep the snap ring stretched and remove the manual transmission case.

27. REMOVE NO. 1 OIL RECEIVER PIPE

(a) Remove the bolt and No. 1 oil receiver pipe from the manual transmission case.

NOTICE:

Do not damage the No. 1 oil receiver pipe.

28. REMOVE TRANSMISSION OIL SEPARATOR

(a) Remove the 2 bolts and transmission oil separator from the manual transmission case.

29. REMOVE TRANSMISSION OIL SEPARATOR

(a) Remove the 2 bolts and transmission oil separator from the front transaxle case.

30. REMOVE 3RD AND 4TH SHIFT FORK SHAFT

(a) Using a 5 mm pin punch and a hammer, tap out the slotted spring pin until the 3rd and 4th shift fork shaft becomes free.

NOTICE:

  • Do not allow the slotted spring pin to contact the gear.
  • Do not fully extract the slotted spring pin from the No. 2 gear shift fork.

*1

3rd and 4th Shift Fork Shaft

(b) Apply protective tape to the locations shown in the illustration.

*1

No. 2 Gear Shift Head

Protective Tape

(c) Using a 5 mm pin punch and a hammer, tap out the slotted spring pin until the 3rd and 4th shift fork shaft becomes free.

NOTICE:

  • Do not allow the slotted spring pin to contact the No. 5 gear shift fork shaft.
  • Do not fully extract the slotted spring pin from the No. 2 gear shift head.

(d) Remove the 3rd and 4th shift fork shaft and No. 2 gear shift head from the No. 2 gear shift fork and front transaxle case.

*1

3rd and 4th Shift Fork Shaft

*2

No. 2 Gear Shift Head

(e) Remove the 2 slotted spring pins.

31. REMOVE NO. 5 GEAR SHIFT FORK SHAFT

(a) Using a screwdriver, remove the E-ring from the shift arm pivot.

(b) Remove the shift arm pivot from the shift arm.

(c) Remove the No. 5 gear shift fork shaft from the front transaxle case.

(d) Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the No. 3 gear shift head.

(e) Remove the No. 3 gear shift head from the No. 5 gear shift fork shaft.

32. REMOVE SHIFT ARM

(a) Remove the shift arm from the front transaxle case.

33. REMOVE REVERSE SHIFT FORK SHAFT

(a) Remove the bolt from the reverse shift fork shaft.

(b) Remove the reverse shift fork shaft from the front transaxle case.

34. INSPECT REVERSE IDLER GEAR THRUST CLEARANCE

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE UNIT: INSPECTION+

35. INSPECT REVERSE IDLER GEAR RADIAL CLEARANCE

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE UNIT: INSPECTION+

36. REMOVE REVERSE IDLER GEAR

(a) Remove the reverse idler gear shaft by sliding and lifting it.

(b) Remove the reverse idler gear, needle roller bearing and reverse idler thrust washer from the reverse idler gear shaft.

37. REMOVE INPUT SHAFT, NO. 1 OUTPUT SHAFT AND NO. 2 OUTPUT SHAFT

(a) Bend left and right sides of SST in opposite directions.

SST: 09312-52010

NOTICE:

Do not bend SST more than necessary.

(b) Install SST to the top and bottom of the No. 3 transmission hub sleeve.

SST: 09312-52010

NOTICE:

Make sure that SST does not easily come loose.

HINT:

Install SST in a tensioned state so that the No. 3 transmission hub sleeve does not shift out of position.

(c) Remove the input shaft, No. 1 output shaft and No. 2 output shaft at the same time.

38. REMOVE DIFFERENTIAL GEAR ASSEMBLY

(a) Remove the differential gear assembly from the front transaxle case.

39. REMOVE TRANSMISSION MAGNET

(a) Remove the transmission magnet from the front transaxle case.

40. REMOVE NO. 1 GEAR SHIFT FORK

(a) Remove the No. 1 gear shift fork from the No. 1 output shaft.

41. REMOVE NO. 2 GEAR SHIFT FORK

(a) Remove the No. 2 gear shift fork from the No. 1 gear shift fork.

42. REMOVE NO. 3 GEAR SHIFT FORK

(a) Remove the No. 3 gear shift fork from the No. 2 output shaft.

43. REMOVE REVERSE SHIFT FORK

(a) Remove the reverse shift fork from the No. 3 gear shift fork.

44. REMOVE OUTPUT SHAFT REAR BEARING

(a) Using SST, remove the output shaft rear bearing (outer race) from the manual transmission case.

SST: 09387-00041

SST: 09387-02020

45. REMOVE OUTPUT SHAFT REAR BEARING SHIM

(a) Remove the output shaft rear bearing shim from the manual transmission case.

46. REMOVE NO. 2 OUTPUT SHAFT REAR BEARING

(a) Using SST, remove the No. 2 output shaft rear bearing (outer race) from the manual transmission case.

SST: 09387-00041

SST: 09387-02020

47. REMOVE OUTPUT SHAFT REAR BEARING SHIM

(a) Remove the output shaft rear bearing shim from the manual transmission case.

48. REMOVE OUTPUT SHAFT COVER

(a) Remove the output shaft cover from the manual transmission case.

49. REMOVE SHIFT FORK SHAFT BEARING

(a) Using SST, remove the 4 shift fork shaft bearings from the manual transmission case.

SST: 09387-00041

09387-01021

SST: 09527-20011

SST: 09612-65014

50. REMOVE SHIFT AND SELECT LEVER SHAFT NEEDLE ROLLER BEARING

(a) Using SST, remove the shift and select lever shaft needle roller bearing from the manual transmission case.

SST: 09387-00041

09387-01021

SST: 09612-65014

51. REMOVE INPUT SHAFT REAR BEARING SHAFT SNAP RING

(a) Using snap ring pliers, remove the input shaft rear bearing shaft snap ring from the manual transmission case.

52. REMOVE INPUT SHAFT FRONT BEARING

(a) Remove the bolt and bearing lock plate from the front transaxle case.

(b) Using SST, remove the input shaft front bearing from the front transaxle case.

SST: 09612-30012

53. REMOVE FRONT TRANSAXLE CASE OIL SEAL

(a) Using a screwdriver with its tip wrapped with protective tape, remove the front transaxle case oil seal from the front transaxle case.

54. REMOVE OUTPUT SHAFT FRONT BEARING

(a) Using SST, remove the output shaft front bearing (outer race) from the front transaxle case.

SST: 09387-00041

SST: 09387-02020

SST: 09527-17011

55. REMOVE OUTPUT SHAFT COVER

(a) Remove the output shaft cover from the front transaxle case.

56. REMOVE NO. 2 OUTPUT SHAFT FRONT BEARING

(a) Using SST, remove the No. 2 output shaft front bearing (outer race) from the front transaxle case.

SST: 09387-00041

SST: 09387-02020

SST: 09527-17011

57. REMOVE OUTPUT SHAFT COVER

(a) Remove the output shaft cover from the front transaxle case.

58. REMOVE MANUAL TRANSMISSION CASE STRAIGHT PIN

(a) Remove the 3 manual transmission case straight pins from the front transaxle case.

59. REMOVE SHIFT FORK SHAFT BEARING

(a) Using SST, remove the 4 shift fork shaft bearings from the front transaxle case.

SST: 09387-00041

09387-01021

SST: 09612-65014

60. REMOVE FRONT DRIVE SHAFT OIL SEAL LH

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): DIFFERENTIAL OIL SEAL (for LH Side): REPLACEMENT+

61. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

(a) Using a brass bar and a hammer, remove the front differential case rear tapered roller bearing (outer race) and front differential case rear shim from the manual transmission case.

(b) Using SST, remove the front differential case rear tapered roller bearing (inner race) from the front No. 1 differential case sub-assembly.

SST: 09950-00020

SST: 09950-00030

SST: 09950-40011

09957-04010

SST: 09950-60011

09951-00540

*a

Turn

*b

Hold

62. REMOVE TRANSAXLE CASE OIL SEAL

Click here 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): DIFFERENTIAL OIL SEAL (for RH Side): REPLACEMENT+ 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): DIFFERENTIAL OIL SEAL (for RH Side): REPLACEMENT+

63. REMOVE FRONT DRIVE SHAFT OIL SEAL RH

(a) Using SST, remove the front drive shaft oil seal RH from the transmission sleeve yoke.

SST: 09308-00010

NOTICE:

Be careful not to damage the transmission sleeve yoke.

64. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

(a) Using SST, remove the front differential case front tapered roller bearing (outer race) from the front transaxle case.

SST: 09387-00041

SST: 09387-02020

SST: 09527-17011

(b) Using SST, remove the front differential case front tapered roller bearing (inner race) and transmission sleeve yoke from the front No. 1 differential case sub-assembly.

SST: 09950-00020

SST: 09950-00030

SST: 09950-40011

09957-04010

SST: 09950-60011

09951-00410

*1

Front Differential Case Front Tapered Roller Bearing (Inner Race)

*2

Transmission Sleeve Yoke

*a

Turn

*b

Hold