Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM1000000026XRB |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): SHIFT LEVER ASSEMBLY: INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 - ] |
INSTALLATION
PROCEDURE
1. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY
(a) Install the floor shift shift lever assembly to the vehicle body with the 4 bolts.
Torque:
12 N·m {122 kgf·cm, 9 ft·lbf}
(b) Engage the 4 clamps to connect the wire harness to the floor shift shift lever assembly.
2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, press in the stopper.
|
|
*a
|
Nut
|
*b
|
Stopper
|
*c
|
Turn
|
*d
|
Push
|
|
|
(b) Connect the transmission control shift cable to the floor shift shift lever assembly, check that the position of the stopper is the same as shown in the illustration.
NOTICE:
Do not forcibly pull the transmission control cable assembly into the cabin.
|
|
(c) Connect the transmission control select cable to the floor shift shift lever assembly, check that the position of the stopper is the same as shown in the illustration.
NOTICE:
Do not forcibly pull the transmission control cable assembly into the cabin.
(d) Connect the transmission control shift cable to the floor shift shift lever assembly.
|
|
*a
|
Transmission Control Select Cable
|
*b
|
Transmission Control Shift Cable
|
|
|
(e) Connect the transmission control select cable to the floor shift shift lever assembly with the clip.
3. ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY
Click here
4. INSTALL CONSOLE BOX ASSEMBLY
Click here
|