|
Last Modified: 01-27-2025 |
6.11:8.1.0 |
Doc ID: RM1000000026XR1 |
|
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
|
Title: EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): DIFFERENTIAL OIL SEAL (for LH Side): REPLACEMENT; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 - ] |
REPLACEMENT
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front drive shaft oil seal LH removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
|
Front wheel alignment adjustment
|
-
Perform "Reset Memory"
-
Perform "Calibration"
|
-
VSC is disabled or malfunctions
-
DTCs are output
-
Slip indicator light illuminates
-
ABS warning light illuminates
|
w/ Electric Parking Brake System:
w/o Electric Parking Brake System:
|
PROCEDURE
1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
Click here
2. REMOVE FRONT DRIVE SHAFT OIL SEAL LH
|
(a) Using SST, tap out the front drive shaft oil seal LH.
SST: 09308-00010
|
|
3. INSTALL FRONT DRIVE SHAFT OIL SEAL LH
(a) Coat the lip of a new front drive shaft oil seal LH with MP grease.
(b) Using SST and a hammer, tap in the front drive shaft oil seal LH.
SST: 09608-10010
SST: 09950-70010
09951-07200
Standard Depth:
-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
|
*a
|
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
|
NOTICE:
-
Make sure that the outer lip of the front drive shaft oil seal LH is not pinched by SST.
|
*a
|
Correct
|
|
*b
|
Incorrect
|
|
*c
|
Outer Lip
|
-
Do not allow foreign matter to attach to the inner lip and outer lip of the front drive shaft oil seal LH.
-
Do not install the front drive shaft oil seal LH at an angle.
-
Do not remove the grease from the inner lip and outer lip of the front drive shaft oil seal LH.
-
Do not damage the lip of the front drive shaft oil seal LH.
4. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH
Click here
|