Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000026XR1
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): DIFFERENTIAL OIL SEAL (for LH Side): REPLACEMENT; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]

REPLACEMENT

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front drive shaft oil seal LH removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Front wheel alignment adjustment
  • Perform "Reset Memory"
  • Perform "Calibration"
  • VSC is disabled or malfunctions
  • DTCs are output
  • Slip indicator light illuminates
  • ABS warning light illuminates

w/ Electric Parking Brake System:

2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System TMC Made): UTILITY 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System): UTILITY

w/o Electric Parking Brake System:

2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): UTILITY

PROCEDURE

1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

Click here 2023 - 2025 MY GR Corolla [09/2022 -        ]; DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY (for G16E-GTS): REMOVAL

2. REMOVE FRONT DRIVE SHAFT OIL SEAL LH

(a) Using SST, tap out the front drive shaft oil seal LH.

SST: 09308-00010

3. INSTALL FRONT DRIVE SHAFT OIL SEAL LH

(a) Coat the lip of a new front drive shaft oil seal LH with MP grease.

(b) Using SST and a hammer, tap in the front drive shaft oil seal LH.

SST: 09608-10010

SST: 09950-70010

09951-07200

Standard Depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

*a

-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

NOTICE:

  • Make sure that the outer lip of the front drive shaft oil seal LH is not pinched by SST.

    *a

    Correct

    *b

    Incorrect

    *c

    Outer Lip
  • Do not allow foreign matter to attach to the inner lip and outer lip of the front drive shaft oil seal LH.
  • Do not install the front drive shaft oil seal LH at an angle.
  • Do not remove the grease from the inner lip and outer lip of the front drive shaft oil seal LH.
  • Do not damage the lip of the front drive shaft oil seal LH.

4. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

Click here 2023 - 2025 MY GR Corolla [09/2022 -        ]; DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY (for G16E-GTS): INSTALLATION