Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000026WFO
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: PARKING BRAKE: PARKING BRAKE ASSEMBLY: DISASSEMBLY; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]

DISASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the LH side and RH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE REAR WHEEL

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL

2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; AXLE AND DIFFERENTIAL: REAR AXLE HUB BOLT (for AWD without Electric Parking Brake): REPLACEMENT+

3. REMOVE DISK WHEEL SPACER

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; BRAKE (REAR): REAR BRAKE (for 2-Pot Caliper): REMOVAL+

4. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG

(a) Remove a parking brake shoe adjusting hole plug

5. REMOVE REAR DISC

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; BRAKE (REAR): REAR BRAKE (for 2-Pot Caliper): REMOVAL+

6. REMOVE NO. 3 PARKING BRAKE SHOE RETURN TENSION SPRING

(a) Using SST, remove the No. 3 parking brake shoe return tension spring.

SST: 09921-00011

7. REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING

(a) Using SST, remove the No. 2 parking brake shoe return tension spring.

SST: 09921-00011

8. REMOVE PARKING BRAKE SHOE STRUT

(a) Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand.

(b) Remove the parking brake shoe strut.

9. REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING

(a) Using SST, remove the No. 1 parking brake shoe return tension spring.

SST: 09921-00011

10. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET

(a) Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand.

(b) Remove the parking brake shoe adjusting screw set.

11. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY

(a) Using SST, remove the parking brake shoe hold down spring, parking brake shoe hold down spring pin and No. 1 parking brake shoe assembly.

SST: 09718-00012

12. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY

(a) Using SST, remove the parking brake shoe hold down spring and parking brake shoe hold down spring pin, and separate the No. 2 parking brake shoe assembly.

SST: 09718-00012

(b) Pull out the pin of the parking brake shoe lever from the No. 2 parking brake shoe assembly, and remove the No. 2 parking brake shoe assembly.

13. REMOVE PARKING BRAKE SHOE LEVER

(a) Using needle-nose pliers, remove the parking brake shoe lever from the parking brake cable assembly.