| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM1000000026WFN |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: PARKING BRAKE: PARKING BRAKE ASSEMBLY: REASSEMBLY; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the LH side and RH side.
- The following procedure is for the LH side.
PROCEDURE
1. APPLY HIGH TEMPERATURE GREASE
(a) Apply high temperature grease to the areas of the parking brake plate which make contact with the shoes as shown in the illustration.
|
High Temperature Grease |
2. INSTALL PARKING BRAKE SHOE LEVER
|
(a) Using needle-nose pliers, install the parking brake shoe lever to the parking brake cable assembly. |
|
(b) Apply high temperature grease to the areas of the parking brake shoe lever which make contact with the No. 2 parking brake shoe assembly.
|
|
High Temperature Grease |
3. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY
|
(a) Insert the pin of the parking brake shoe lever into the No. 2 parking brake shoe assembly. |
|
|
(b) Using SST, install the No. 2 parking brake shoe assembly with the parking brake shoe hold down spring and parking brake shoe hold down spring pin. SST: 09718-00012 |
|
4. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY
|
(a) Using SST, install the No. 1 parking brake shoe assembly with the parking brake shoe hold down spring and parking brake shoe hold down spring pin. SST: 09718-00012 |
|
5. INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET
|
|
High Temperature Grease |
(a) Apply high temperature grease to the parking brake shoe adjusting screw set as shown in the illustration.
|
(b) Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand. |
|
|
(c) Install the parking brake shoe adjusting screw set. |
|
6. INSTALL NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING
|
(a) Using SST, install the No. 1 parking brake shoe return tension spring. SST: 09921-00011 |
|
7. INSTALL PARKING BRAKE SHOE STRUT
|
(a) Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand. |
|
|
(b) Install the parking brake shoe strut. |
|
8. INSTALL NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING
(a) Apply high temperature grease to the areas of the No. 2 parking brake shoe return tension spring which make contact with the No. 2 parking brake shoe assembly and parking brake shoe strut.
|
|
High Temperature Grease |
|
(b) Using SST, install the No. 2 parking brake shoe return tension spring. SST: 09921-00011 NOTICE: Insert the tip of the No. 2 parking brake shoe return tension spring into the hole in the parking brake shoe strut as shown in the illustration. |
|
9. INSTALL NO. 3 PARKING BRAKE SHOE RETURN TENSION SPRING
|
(a) Using needle-nose pliers, install the No. 3 parking brake shoe return tension spring. SST: 09921-00011 |
|
10. CHECK PARKING BRAKE INSTALLATION
(a) Check that each part is installed properly.
NOTICE:
There should be no oil or grease on the friction surfaces of the shoe linings or discs.
|
*A |
LH Side |
*B |
RH Side |
|
Front of the Vehicle |
- |
- |
11. INSTALL REAR DISC
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; BRAKE (REAR): REAR BRAKE (for 2-Pot Caliper): INSTALLATION+](/t3Portal/stylegraphics/info.gif)
12. ADJUST PARKING BRAKE SHOE CLEARANCE
Click here
13. INSTALL DISK WHEEL SPACER
Click here
14. INSTALL PARKING BRAKE SHOE ADJUSTING HOLE PLUG
|
(a) Install the parking brake shoe adjusting hole plug. |
|
15. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY
Click here
16. ADJUST PARKING BRAKE LEVER TRAVEL
Click here
17. INSTALL REAR WHEEL
Click here
|
|