| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000026WEW |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: MAINTENANCE: FRONT DISC BRAKE PAD (except 4-Pot Caliper): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT
NOTICE:
- When replacing worn front disc brake pads, the front disc brake anti-squeal shims and front disc brake pad wear indicator plates must be replaced together with the front disc brake pads.
- Do not apply lubricants to the lining surface of the brake pad.
- Install each front disc brake pad wear indicator plate in the correct position.
- Install the front disc brake anti-squeal shims in the correct position and direction.
|
(a) Check the front disc brake pad. HINT: If the front disc brake pad (outer side) has an identification mark, be sure to confirm the installation location. |
|
(b) Apply brake shim grease (Part No. 08887-80409) to both sides of each front No. 1 disc brake anti-squeal shim.
|
Brake Shim Grease (Part No. 08887-80409) |
|
(c) Install the front No. 1 disc brake anti-squeal shim and front No. 2 disc brake anti-squeal shim to each front disc brake pad. |
|
(d) Install the front disc brake pad wear indicator plate to each front disc brake pad.
2. INSTALL FRONT DISC BRAKE PAD
CAUTION:
- Be careful not to get pinched by the front disc brake cylinder assembly or other parts when installing the front disc brake pads.
- After lifting up the front disc brake cylinder assembly, secure it in place before performing any work on it.
- The front disc brake cylinder assembly could fall, pinching hands or fingers and causing injury.
(a) Push in the front disc brake piston.
NOTICE:
- Make sure that the brake fluid does not overflow from the reservoir.
- Do not forcibly push in the front disc brake piston.
(b) Install the 2 front disc brake pads to the front disc brake cylinder mounting.
NOTICE:
- Keep the friction surfaces of the front disc brake pads and front disc free from oil and grease.
- Install the front disc brake pad so that the front disc brake pad wear indicator plate is mounted on the upper side of the vehicle.
HINT:
If the front disc brake pad has an identification mark, be sure to confirm the installation location.
|
*a |
Front Disc Brake Pad (Inner Side of the Vehicle) |
|
*b |
Front Disc Brake Pad (Outer Side of the Vehicle) |
|
*c |
Identification Mark |
(c) Hold the front disc brake cylinder slide pin (lower side) and install the front disc brake cylinder assembly to the front disc brake cylinder mounting with the bolt.
Torque:
34.3 N·m {350 kgf·cm, 25 ft·lbf}
(d) Depress the brake pedal several times.
3. INSPECT BRAKE FLUID LEVEL IN RESERVOIR
Click here
![2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 - ]; BRAKE SYSTEM (OTHER): BRAKE FLUID (for Gasoline Model): ON-VEHICLE INSPECTION+](/t3Portal/stylegraphics/info.gif)
4. INSTALL FRONT WHEEL
Click here
|
|