| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM1000000026WEP |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: MAINTENANCE: REAR DISC BRAKE PAD (for 2-Pot Caliper): REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear disc brake pad removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Tire |
ECU Data Initialization (When performing tire replacement after RoB code X2104 is output) |
Active Torque Split AWD System |
|
CAUTION / NOTICE / HINT
NOTICE:
After replacing the rear disc brake pads, the brake pedal may feel soft due to clearance between the rear disc brake pads and rear disc. Depress the brake pedal several times until the brake pedal feels firm.
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE REAR WHEEL
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE REAR DISC BRAKE PIN HOLD CLIP
|
(a) Disengage the hook from the rear disc brake cylinder assembly and remove the rear disc brake pin hold clip from the 2 rear disc brake anti-rattle pins. |
|
3. REMOVE REAR DISC BRAKE ANTI-RATTLE PIN
|
(a) While pressing the rear disc brake anti-rattle spring, remove the rear disc brake anti-rattle pin (lower side). |
|
|
(b) Disengage the rear disc brake anti-rattle spring from the rear disc brake pads and remove the rear disc brake anti-rattle pin (upper side). |
|
4. REMOVE REAR DISC BRAKE ANTI-RATTLE SPRING
|
(a) Remove the rear disc brake anti-rattle spring. |
|
5. REMOVE REAR DISC BRAKE PAD
NOTICE:
Be sure to inspect the rear disc when replacing the rear disc brake pads with new ones.
Click here
|
(a) Remove the 2 rear disc brake pads from the rear disc brake cylinder assembly. |
|
6. REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM KIT
|
(a) Remove the 2 rear disc brake anti-squeal shims from each rear disc brake pad. |
|
|
|