Last Modified: 06-05-2026 6.11:8.1.0 Doc ID: RM1000000026WEP
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: MAINTENANCE: REAR DISC BRAKE PAD (for 2-Pot Caliper): REMOVAL; 2023 - 2026 MY GR Corolla Corolla Corolla Hatchback Corolla HV [09/2022 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear disc brake pad removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Tire

ECU Data Initialization (When performing tire replacement after RoB code X2104 is output)

Active Torque Split AWD System

2023 - 2026 MY GR Corolla Corolla Corolla Hatchback [09/2022 -        ]; GF1A (TRANSFER / 4WD / AWD): ACTIVE TORQUE SPLIT AWD SYSTEM: CALIBRATION

CAUTION / NOTICE / HINT

NOTICE:

  • Immediately after installing the brake pads, the braking performance may be reduced. Always perform a road test in a safe place while paying attention to the surroundings.
  • After replacing the rear disc brake pads, the brake pedal may feel soft due to clearance between the rear disc brake pads and rear disc. Depress the brake pedal several times until the brake pedal feels firm.
  • After replacing the rear disc brake pads, always perform a road test to check the braking performance and check for vibrations.

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE REAR WHEEL

Click here 2023 - 2026 MY GR Corolla Corolla Corolla Hatchback Corolla HV [09/2022 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL

2. REMOVE REAR DISC BRAKE PIN HOLD CLIP

(a) Disengage the hook from the rear disc brake cylinder assembly and remove the rear disc brake pin hold clip from the 2 rear disc brake anti-rattle pins.

3. REMOVE REAR DISC BRAKE ANTI-RATTLE PIN

(a) While pressing the rear disc brake anti-rattle spring, remove the rear disc brake anti-rattle pin (lower side).

(b) Disengage the rear disc brake anti-rattle spring from the rear disc brake pads and remove the rear disc brake anti-rattle pin (upper side).

4. REMOVE REAR DISC BRAKE ANTI-RATTLE SPRING

(a) Remove the rear disc brake anti-rattle spring.

5. REMOVE REAR DISC BRAKE PAD

NOTICE:

Be sure to inspect the rear disc when replacing the rear disc brake pads with new ones.

Click here 2023 - 2026 MY GR Corolla Corolla Corolla Hatchback Corolla HV [09/2022 -        ]; BRAKE (REAR): REAR BRAKE (for 2-Pot Caliper): INSPECTION

(a) Remove the 2 rear disc brake pads from the rear disc brake cylinder assembly.

6. REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM KIT

(a) Remove the 2 rear disc brake anti-squeal shims from each rear disc brake pad.

*1

Rear Disc Brake Anti-squeal Shim

*2

Rear Disc Brake Pad