| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM1000000026WEM |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: MAINTENANCE: FRONT DISC BRAKE PAD (for 4-Pot Caliper): REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front disc brake pad removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Tire |
ECU Data Initialization (When performing tire replacement after RoB code X2104 is output) |
Active Torque Split AWD System |
|
CAUTION / NOTICE / HINT
NOTICE:
After replacing the front disc brake pads, the brake pedal may feel soft due to clearance between the front disc brake pads and front disc. Depress the brake pedal several times until the brake pedal feels firm.
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE FRONT WHEEL
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT DISC BRAKE PIN HOLD CLIP
|
(a) Disengage the hook from the front disc brake cylinder assembly and remove the front disc brake pin hold clip from the 2 front disc brake anti-rattle pins. |
|
3. REMOVE FRONT DISC BRAKE ANTI-RATTLE PIN
|
(a) While pressing the front disc brake anti-rattle spring, remove the front disc brake anti-rattle pin (upper side). |
|
|
(b) Disengage the front disc brake anti-rattle spring from the front disc brake pads and remove the front disc brake anti-rattle pin (lower side). |
|
4. REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING
|
(a) Remove the front disc brake anti-rattle spring. |
|
5. REMOVE FRONT DISC BRAKE PAD
NOTICE:
Be sure to inspect the front disc when replacing the front disc brake pads with new ones.
Click here
|
(a) Remove the 2 front disc brake pads from the front disc brake cylinder assembly. |
|
6. REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT
|
(a) Remove the 2 front disc brake anti-squeal shims from each front disc brake pad. |
|
|
|