Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000026PZH |
Model Year Start: 2023 |
Model: Corolla HV |
Prod Date Range: [09/2022 -
] |
Title: HYBRID / BATTERY CONTROL: HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY with PA10): P33E600,P33E700; Hybrid/EV Battery Stack 1 Capacity Decline; 2023 - 2025 MY Corolla HV [09/2022 - ] |
DTC
|
P33E600
|
Hybrid/EV Battery Stack 1 Capacity Decline
|
DTC
|
P33E700
|
Hybrid/EV Battery Stack 2 Capacity Decline
|
DESCRIPTION
The HV battery is composed of 56 cells (3.7 V each) in series. The battery ECU assembly monitors the capacity of each HV battery cell to detect malfunctions of the HV battery.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Warning Indicate
|
Note
|
P33E600
|
Hybrid/EV Battery Stack 1 Capacity Decline
|
Full charge capacity of the No. 1 HV supply stack sub-assembly is less than the specified value.
(1 trip detection logic)
|
HV battery
|
Does not come on
|
Master Warning Light:
Comes on
|
SAE Code: P33E6
|
P33E700
|
Hybrid/EV Battery Stack 2 Capacity Decline
|
Full charge capacity of the No. 2 HV supply stack sub-assembly is less than the specified value.
(1 trip detection logic)
|
HV battery
|
Does not come on
|
Master Warning Light:
Comes on
|
SAE Code: P33E7
|
CONFIRMATION DRIVING PATTERN
HINT:
After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
-
Connect the GTS to the DLC3.
-
Turn the ignition switch to ON and turn the GTS on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the ignition switch off and wait for 2 minutes or more.
-
Turn the ignition switch to ON and turn the GTS on.
-
Drive the vehicle on urban roads for approximately 10 minutes.
(This DTC may not be stored if the vehicle is stopped or being driven at a constant speed.)
-
Enter the following menus: Powertrain / HV Battery / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system has a malfunction.
-
If the judgment result shows INCOMPLETE, perform the normal judgment procedure again.
CAUTION / NOTICE / HINT
CAUTION:
Refer to the precautions before inspecting high voltage circuit.
Click here
PROCEDURE
1.
|
CHECK DTC OUTPUT (HV BATTERY, HYBRID CONTROL)
|
(a) Check for DTCs.
Powertrain > HV Battery > Trouble Codes
Powertrain > Hybrid Control > Trouble Codes
Result
|
Proceed to
|
"P33E600 or P33E700" only is output, or DTCs except the ones in the table below are also output.
|
A
|
DTCs of hybrid battery system in the table below are output.
|
B
|
DTCs of hybrid control system in the table below are output.
|
C
|
System
|
Relevant DTC
|
Hybrid battery system
|
P060A47
|
Hybrid/EV Battery Energy Control Module Monitoring Processor Watchdog / Safety MCU Failure
|
P060B49
|
Hybrid/EV Battery Energy Control Module A/D Processing Internal Electronic Failure
|
P060687
|
Hybrid/EV Battery Energy Control Module Processor to Monitoring Processor Missing Message
|
Hybrid control system
|
P0A1F94
|
Hybrid/EV Battery Energy Control Module Unexpected Operation
|
(b) Turn the ignition switch off.
B |
|
GO TO DTC CHART (HYBRID BATTERY SYSTEM)
|
|