Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000026PW1 |
Model Year Start: 2023 |
Model: Corolla HV |
Prod Date Range: [09/2022 -
] |
Title: HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM (for LITHIUM-ION BATTERY with PA10): P160600,P160604; Collision detected or Collision Sensor Connection (Open); 2023 - 2025 MY Corolla HV [09/2022 - ] |
DTC
|
P160600
|
Collision detected or Collision Sensor Connection (Open)
|
DTC
|
P160604
|
Collision detected or Collision Sensor Connection (Open) System Internal Failure
|
DTC SUMMARY
MALFUNCTION DESCRIPTION
The hybrid vehicle control ECU and airbag ECU detect that a collision has occurred and shut off the system main relay.
The cause of this DTC may be one of the following:
-
Collision is detected
-
Detection sensor system malfunction
-
Airbag system malfunction
-
Hybrid vehicle control ECU malfunction
-
Communication malfunction between airbag ECU and hybrid vehicle control ECU
-
Hybrid vehicle control ECU communication malfunction
DESCRIPTION
The hybrid vehicle control ECU receives a signal that indicates a collision from the airbag ECU assembly to detect a collision. After detecting a collision, the hybrid vehicle control ECU shuts off the high voltage systems for safety.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Warning Indicate
|
Note
|
P160600
|
Collision detected or Collision Sensor Connection (Open)
|
Collision detection
A block signal is received from the airbag ECU assembly.
(1 trip detection logic)
|
-
Airbag ECU assembly
-
Hybrid vehicle control ECU
-
Airbag system
|
Does not come on
|
Master Warning:
Comes on
|
SAE Code:
P1606
|
P160604
|
Collision detected or Collision Sensor Connection (Open) System Internal Failure
|
Collision detection
Multiple wiring malfunctions occur simultaneously.
(1 trip detection logic)
|
-
Hybrid vehicle control ECU
-
Airbag system
|
Does not come on
|
Master Warning:
Comes on
|
SAE Code:
P1606
|
HINT:
If P160600 or P160604 is output, the hybrid system cannot be started unless the DTCs are cleared using the GTS.
CONFIRMATION DRIVING PATTERN
HINT:
After repairs have been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
-
Connect the GTS to the DLC3.
-
Turn the ignition switch to ON and turn the GTS on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the ignition switch off and wait for 30 seconds or more.
-
With ignition switch to ON (READY) and wait for 30 seconds or more.
-
Turn the ignition switch off and wait for 30 seconds or more.
-
Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system has a malfunction.
-
If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.
CAUTION / NOTICE / HINT
HINT:
P160600 or P160604 may be output as a result of the malfunction indicated by the DTCs in table below.
Malfunction Content
|
Relevant DTC
|
Microcomputer malfunction
|
P060647
|
Hybrid/EV Powertrain Control Module Processor Watchdog / Safety MCU Failure
|
P060687
|
Hybrid/EV Powertrain Control Module Processor to Monitoring Processor Missing Message
|
P060A29
|
Hybrid/EV Powertrain Control Module Monitoring Processor Signal Invalid
|
P060A44
|
Hybrid/EV Powertrain Control Module Monitoring Processor Data Memory Failure
|
P060A45
|
Hybrid/EV Powertrain Control Module Monitoring Processor Program Memory Failure
|
P060A47
|
Hybrid/EV Powertrain Control Module Monitoring Processor Watchdog / Safety MCU Failure
|
P060A49
|
Hybrid/EV Powertrain Control Module Monitoring Processor Internal Electronic Failure
|
P060A87
|
Hybrid/EV Powertrain Control Module Processor from Monitoring Processor Missing Message
|
P060B1C
|
Hybrid/EV Powertrain Control Module A/D Processing Voltage Out of Range
|
P060B49
|
Hybrid/EV Powertrain Control Module A/D Processing Internal Electronic Failure
|
P060B71
|
Hybrid/EV Powertrain Control Module A/D Processing Actuator Stuck
|
P06881F
|
ECM/PCM Power Relay Sense Circuit Intermittent
|
P1C9E9F
|
Hybrid/EV System Reset Stuck Off
|
P1CE31C
|
Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Voltage Out of Range
|
P1CE349
|
Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Internal Electronic Failure
|
P1CE371
|
Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Actuator Stuck
|
PROCEDURE
1.
|
CHECK VEHICLE FOR COLLISION DAMAGE
|
(a) Check the vehicle condition.
Result
|
Proceed to
|
The vehicle is not damaged
|
A
|
The vehicle is damaged
|
B
|
B |
|
REPAIR VEHICLE
|
A
|
|
|
2.
|
CHECK DTC OUTPUT (HYBRID CONTROL)
|
(a) Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Result
|
Proceed to
|
P160600 is output
|
A
|
P160604 is output
|
B
|
A
|
|
|
(a) Turn the ignition switch to ON and wait for 10 seconds or more.
(b) Clear the DTCs.
Powertrain > Hybrid Control > Clear DTCs
(c) Turn the ignition switch off and wait for 2 minutes or more.
NEXT
|
|
|
4.
|
CHECK DTC OUTPUT (HEALTH CHECK)
|
(a) Turn the ignition switch to ON and wait for 10 seconds or more.
(b) Enter the following menus: System Select / Health Check.
Result
|
Proceed to
|
P160600 is output
|
A
|
DTCs except P160600 are output
|
B
|
(c) Turn the ignition switch off.
B |
|
GO TO DTC CHART
|
5.
|
CHECK DTC OUTPUT (HYBRID CONTROL, MOTOR GENERATOR CONTROL)
|
(a) Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Powertrain > Motor Generator > Trouble Codes
Result
|
Proceed to
|
DTCs of hybrid control system in the table below are output.
|
A
|
DTCs of motor generator control system in the table below are output.
|
B
|
System
|
Relevant DTC
|
Hybrid control system
|
P310711
|
Lost Communication with Airbag System Control Module Circuit Short to Ground
|
P310715
|
Lost Communication with Airbag System Control Module Circuit Short to Auxiliary Battery or Open
|
U015187
|
Lost Communication with Restraints Control Module Missing Message
|
Motor generator control system
|
U11B387
|
Lost Communication with Hybrid/EV Powertrain Control Module (ch5) Missing Message
|
A |
|
GO TO DTC CHART (HYBRID CONTROL SYSTEM)
|
|