Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000026PUL |
Model Year Start: 2023 |
Model: Corolla HV |
Prod Date Range: [09/2022 -
] |
Title: HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM (for LITHIUM-ION BATTERY with PA10): U042481; HVAC Control Module to Hybrid Powertrain Control Module Invalid Serial Data Received; 2023 - 2025 MY Corolla HV [09/2022 - ] |
DTC
|
U042481
|
HVAC Control Module to Hybrid Powertrain Control Module Invalid Serial Data Received
|
DESCRIPTION
If the hybrid vehicle control ECU receives an invalid compressor control request from the air conditioning amplifier assembly via CAN communication, it will store this DTC.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Warning Indicate
|
Note
|
U042481
|
HVAC Control Module to Hybrid Powertrain Control Module Invalid Serial Data Received
|
An invalid control request was received from the air conditioning amplifier assembly
(1 trip detection logic)
|
Air conditioning amplifier assembly
|
Does not come on
|
Master Warning:
Does not come on
|
SAE Code:
U0424
|
CONFIRMATION DRIVING PATTERN
HINT:
After repair has been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
-
Connect the GTS to the DLC3.
-
Turn the ignition switch to ON and turn the GTS on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the ignition switch off and wait for 2 minutes or more.
-
Turn the ignition switch to ON and turn the GTS on.
-
Wait for 1 minute or more with the vehicle stopped, the ignition switch to ON (READY), the shift lever in P and the air conditioning system on (Lo/COOL MAX, blower speed HI).
-
Turn the air conditioning system off and wait for 10 seconds or more with the ignition switch ON (READY).
-
Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system has a malfunction.
-
If the judgment result shows INCOMPLETE, perform driving pattern again.
PROCEDURE
1.
|
CHECK DTC OUTPUT (AIR CONDITIONER)
|
(a) Check if DTCs related to the Air Conditioning System (A/C) are output.
Body Electrical > Air Conditioner > Trouble Codes
Result
|
Proceed to
|
DTCs related to Air Conditioning System (A/C) are not output.
|
A
|
DTCs related to Air Conditioning System (A/C) are output.
|
B
|
(b) Turn the ignition switch off.
|