Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM1000000026ONC |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for Hatchback): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY
(a) w/o Pretensioner:
(1) Engage the 2 guides and temporarily install the rear 3 point type seat outer belt assembly with the 2 bolts.
|
|
(2) Fully tighten the bolt (A) and then the bolt (B) to install the rear 3 point type seat outer belt assembly.
Torque:
Bolt (A) :
12.5 N·m {127 kgf·cm, 9 ft·lbf}
Bolt (B) :
42 N·m {428 kgf·cm, 31 ft·lbf}
(3) Check that the ELR locks.
-
With the rear 3 point type seat outer belt assembly installed to the vehicle, check that the belt locks when it is pulled out quickly.
NOTICE:
This check should be performed with the rear 3 point type seat outer belt assembly installed to the vehicle.
(b) w/ Pretensioner:
(1) Engage the 2 guides and temporarily install the rear 3 point type seat outer belt assembly with the 2 bolts.
|
|
(2) Fully tighten the bolt (A) and then the bolt (B) to install the rear 3 point type seat outer belt assembly.
Torque:
Bolt (A) :
12.5 N·m {127 kgf·cm, 9 ft·lbf}
Bolt (B) :
42 N·m {428 kgf·cm, 31 ft·lbf}
(3) Connect the pretensioner connector and lock the locking button as shown in the illustration.
NOTICE:
Securely lock the locking button.
|
|
*a
|
Locking Button
|
*b
|
Lock
|
|
|
(4) Check that the ELR locks.
-
With the rear 3 point type seat outer belt assembly installed to the vehicle, check that the belt locks when it is pulled out quickly.
NOTICE:
This check should be performed with the rear 3 point type seat outer belt assembly installed to the vehicle.
(c) Connect the shoulder anchor of the rear 3 point type seat outer belt assembly with the bolt.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
2. INSTALL ROOF SIDE INNER GARNISH
Click here
3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for RH Side)
for Bulb Type: Click here
for LED Type: Click here
4. CONNECT REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY
(a) Install the floor anchor of the rear 3 point type seat outer belt assembly with the bolt.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
NOTICE:
Do not allow the anchor part of the rear 3 point type seat outer belt assembly to overlap the protruding parts of the floor panel.
|
Protruding Part
|
5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY
Click here
6. INSTALL CENTER FLOOR CROSSMEMBER BRACE SUB-ASSEMBLY (for GR)
Click here
7. INSTALL DECK TRIM SIDE LOWER BOARD (w/ Spare Tire)
Click here
8. INSTALL REAR SEAT SIDE GARNISH
Click here
9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
Click here
10. INSTALL REAR DOOR SCUFF PLATE
Click here
11. INSTALL REAR SEAT CUSHION LOCK HOOK
Click here
12. INSTALL REAR SEAT CUSHION ASSEMBLY
Click here
13. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)
Click here
14. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)
Click here
15. CONNECT REAR SEAT CENTER LAP TYPE BELT ASSEMBLY
Click here
16. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)
Click here
17. INSTALL REAR SEAT HEADREST ASSEMBLY
Click here
18. INSTALL REAR DECK TRIM COVER (w/o Deck Board)
Click here
19. INSTALL REAR FLOOR MAT ASSEMBLY (w/o Deck Board)
Click here
20. INSTALL REAR DECK TRIM COVER (w/ Deck Board)
Click here
21. INSTALL DECK FLOOR BOX RH (w/ Spare Tire)
Click here
22. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)
Click here
23. INSTALL FRONT DECK FLOOR BOX (w/ Spare Tire)
Click here
24. INSTALL REAR NO. 1 FLOOR BOARD (w/ Spare Tire)
Click here
25. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Pretensioner)
for M20A-FKS: Click here
26. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)
Click here
27. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
Click here
28. INSPECT SRS WARNING LIGHT (w/ Pretensioner)
Click here
|