| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000026NRW |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: G16E-GTS (LUBRICATION): OIL PUMP: REMOVAL; 2023 MY GR Corolla [09/2022 - 11/2022] | ||
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEELS
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE REAR ENGINE UNDER COVER RH
Click here
3. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
4. REMOVE FAN AND GENERATOR V BELT
Click here
5. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY
Click here
6. REMOVE NO. 1 AIR TUBE
|
(a) Remove the 2 bolts. |
|
(b) Loosen the 2 hose clamps to remove the No. 1 air tube from the No. 2 air hose and No. 3 air hose.
7. REMOVE NO. 2 AIR HOSE
|
(a) Loosen the hose clamp to remove the No. 2 air hose from the turbocharger sub-assembly. |
|
8. DISCONNECT ENGINE WIRE
|
(a) Remove the bolt and disconnect the engine wire from the timing chain cover assembly. |
|
9. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
Click here
10. REMOVE TIMING GEAR COVER INSULATOR
|
(a) Remove the timing gear cover insulator from the timing chain cover assembly. |
|
11. REMOVE CRANKSHAFT PULLEY ASSEMBLY
Click here
12. REMOVE TIMING CHAIN COVER ASSEMBLY
|
(a) Remove the 12 bolts and seal washer. |
|
(b) Remove the timing chain cover assembly by prying between the timing chain cover assembly and oil pan sub-assembly, cylinder block sub-assembly with a screwdriver with its tip wrapped with protective tape.
|
(c) Remove the 2 oil pump gaskets from the cylinder block sub-assembly. NOTICE: Be careful not to damage the contact surfaces of the oil pan sub-assembly. |
|
13. REMOVE TIMING CHAIN COVER OIL SEAL
Click here
|
|