Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000026D69
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: NETWORKING: LIN COMMUNICATION SYSTEM (for TMC Made): DATA LIST / ACTIVE TEST; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

DATA LIST / ACTIVE TEST

DATA LIST

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Communication D-Door Motor

Connection status between power window regulator motor assembly (driver door) and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

DTC is output if an error occurs in LIN communication.

Communication P-Door Motor

Connection status between power window regulator motor assembly (front passenger door) and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

DTC is output if an error occurs in LIN communication.

Communication RR-Door Motor

Connection status between power window regulator motor assembly (rear RH door) and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

DTC is output if an error occurs in LIN communication.

Communication RL-Door Motor

Connection status between power window regulator motor assembly (rear LH door) and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

DTC is output if an error occurs in LIN communication.

Communication Intrusion Sensor 1

Connection status between map light assembly and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

Although the item is displayed on the GTS, it is not applicable to this vehicle.

Communication Intrusion Sensor 2

Connection status between map light assembly and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

Although the item is displayed on the GTS, it is not applicable to this vehicle.

Communication Sunshade ECU

Connection status between roof sunshade ECU and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

Although the item is displayed on the GTS, it is not applicable to this vehicle.

Communication Slide Roof

Connection status between sliding roof ECU and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

  • w/ Sliding Roof System
  • DTC is output if an error occurs in LIN communication.

Communication Humidity/Rain Sensor

Connection status between rain sensor and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

Although the item is displayed on the GTS, it is not applicable to this vehicle.

Communication Double Locking

Connection status between double lock door control relay assembly and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

Although the item is displayed on the GTS, it is not applicable to this vehicle.

Communication Master Switch

Connection status between multiplex network master switch assembly and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Not Connected

OK: Connected

DTC is output if an error occurs in LIN communication.