Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM1000000026D2X
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: BRAKE (FRONT): FRONT BRAKE (for 4-Pot Caliper): REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front brake removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Tire

ECU Data Initialization (When performing tire replacement after RoB code X2104 is output)

Active Torque Split AWD System

2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; GF1A (TRANSFER / 4WD / AWD): ACTIVE TORQUE SPLIT AWD SYSTEM: CALIBRATION

CAUTION / NOTICE / HINT

NOTICE:

  • To avoid degrading the precision of the assembly, do not loosen or remove the 2 bolts shown in the illustration.
  • If the bolts have been loosened or removed, use the following procedure to reassemble the parts.
    1. Temporarily install the front disc brake cylinder assembly with the 2 bolts.
    2. Start the engine.
    3. Depress the brake pedal to continuously apply hydraulic pressure.
    4. Temporarily tighten bolt A to 30 N*m (306 kgf*cm, 22 ft.*lbf).
    5. Temporarily tighten bolt B to 30 N*m (306 kgf*cm, 22 ft.*lbf).
    6. Fully tighten bolt A to 100 N*m (1020 kgf*cm, 74 ft.*lbf).
    7. Fully tighten bolt B to 100 N*m (1020 kgf*cm, 74 ft.*lbf).
    8. Release the brake pedal to release the hydraulic pressure.
    9. Check that the 2 bolts are tightened to 100 N*m (1020 kgf*cm, 74 ft.*lbf).

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE FRONT WHEEL

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL

2. DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.

3. REMOVE FRONT DISC BRAKE PIN HOLD CLIP

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: FRONT DISC BRAKE PAD (for 4-Pot Caliper): REMOVAL+

4. REMOVE FRONT DISC BRAKE ANTI-RATTLE PIN

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: FRONT DISC BRAKE PAD (for 4-Pot Caliper): REMOVAL+

5. REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: FRONT DISC BRAKE PAD (for 4-Pot Caliper): REMOVAL+

6. REMOVE FRONT DISC BRAKE PAD

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: FRONT DISC BRAKE PAD (for 4-Pot Caliper): REMOVAL+

7. REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: FRONT DISC BRAKE PAD (for 4-Pot Caliper): REMOVAL+

8. DISCONNECT FRONT FLEXIBLE HOSE

(a) Remove the union bolt and disconnect the front flexible hose from the front disc brake cylinder assembly.

(b) Remove the gasket from the front flexible hose.

9. REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY

(a) Remove the 2 bolts and front disc brake cylinder assembly from the steering knuckle.

10. REMOVE FRONT DISC

(a) Put matchmarks on the front disc and the front axle hub sub-assembly.

HINT:

Not required when replacing the front disc.

*a

Matchmark

(b) Remove the front disc from the front axle hub sub-assembly.