Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000026CER
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: G16E-GTS (LUBRICATION): OIL PRESSURE AND TEMPERATURE SENSOR: INSTALLATION; 2023 - 2025 MY GR Corolla [09/2022 -        ]

INSTALLATION

PROCEDURE

1. INSTALL OIL PRESSURE AND TEMPERATURE SENSOR

(a) Apply adhesive to the area shown in the illustration.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

*a

Oil Inlet Port

*b

3 Threads or More

Adhesive Application Area

NOTICE:

  • Do not apply adhesive to the oil inlet port of the oil pressure and temperature sensor.
  • Apply the adhesive to the first 3 threads or more of the oil pressure and temperature sensor.
  • Apply adhesive to the entire circumference of the thread.
  • To prevent contamination by foreign matter, install immediately after applying adhesive.

(b) Using a 24 mm deep socket wrench, install the oil pressure and temperature sensor.

Torque:

15 N·m {153 kgf·cm, 11 ft·lbf}

NOTICE:

Do not start the engine within 1 hour of installation.

(c) Connect the oil pressure and temperature sensor connector.

(d) Connect the compressor with pulley assembly connector.

2. INSPECT FOR ENGINE OIL LEAK

Click here 2023 - 2025 MY GR Corolla [09/2022 -        ]; MAINTENANCE: G16E-GTS OIL AND OIL FILTER: REPLACEMENT+

3. CHECK ENGINE OIL LEVEL

Click here 2023 MY GR Corolla [09/2022 - 08/2023]; G16E-GTS (LUBRICATION): LUBRICATION SYSTEM: ON-VEHICLE INSPECTION+ 2024 - 2025 MY GR Corolla [08/2023 -        ]; G16E-GTS (LUBRICATION): LUBRICATION SYSTEM: ON-VEHICLE INSPECTION+

4. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here 2023 MY GR Corolla [09/2022 - 11/2022]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2023 - 2025 MY GR Corolla [11/2022 -        ]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+