Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM10000000269OL
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: MIRROR (EXT): POWER MIRROR CONTROL SYSTEM (for TMC Made): DATA LIST / ACTIVE TEST; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the GTS to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the GTS on.

(d) Enter the following menus: Body Electrical / Main Body or Power Distribution Box / Data List.

(e) Read the Data List according to the display on the GTS.

Body Electrical > Power Distribution Box > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Mirror Heater Input Signal

Mirror heater drive signal (Input)

OFF or ON

OFF: Ignition switch ON, rear defogger switch off

ON: Ignition switch ON, rear defogger switch on

w/ Mirror Heater

Mirror Heater Output Signal

Mirror heater drive signal (Output)

OFF or ON

OFF: Ignition switch ON, rear defogger switch off

ON: Ignition switch ON, rear defogger switch on

w/ Mirror Heater

Mirror Heater Output Current

Mirror heater output current

0 to 255.0 A

Mirror heater operating: 2.8 to 3.4 A

w/ Mirror Heater

Mirror Heater Fuse Shut Off Status

Mirror heater output current shut off status

OFF or ON

OFF: Normal state

ON: Current shut off state

w/ Mirror Heater

Mirror Heater Fuse Shut Off Count

Mirror heater output current shut off count

0 to 255

0

w/ Mirror Heater

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the GTS to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the GTS on.

(d) Enter the following menus: Body Electrical / Main Body or Air Conditioner / Active Test.

(e) Perform the Active Test according to the display on the GTS.

Body Electrical > Air Conditioner > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Rear Defogger Relay

Mirror Heater

OFF or ON

w/ Mirror Heater