w/ Smart Key System
- Code registration (Smart key System (for Start Function))
| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM10000000269G7 |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during DCM (telematics transceiver) removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
DCM (telematics transceiver) |
DCM activation |
Safety Connect System |
|
|
Code registration (Smart key System (for Start Function)) |
Telematics System |
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
DCM (telematics transceiver) |
DCM activation |
Safety Connect System |
|
|
|
Telematics System |
|
|
w/o Smart Key System
|
Telematics System |
|
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
![2023 MY Corolla Corolla Hatchback Corolla HV [09/2022 - 11/2022]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here
4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Click here
6. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
7. DISCONNECT INSTRUMENT PANEL WIRE
|
(a) Disengage the clamp. |
|
|
(b) Remove the 2 nuts and disconnect the instrument panel wire as shown in the illustration. |
|
8. REMOVE NAVIGATION ECU COVER (for TMMMS Made with Navigation System)
Click here
9. REMOVE NAVIGATION ECU WITH BRACKET (for TMMMS Made with Navigation System)
Click here
10. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
|
(a) Disconnect the 6 connectors. |
|
(b) Remove the 2 nuts and DCM (telematics transceiver) with bracket.
11. REMOVE NO. 2 TELEPHONE BRACKET
|
(a) Remove the 2 screws and No. 2 telephone bracket. |
|
12. REMOVE NO. 1 TELEPHONE BRACKET
|
(a) Remove the 2 screws and No. 1 telephone bracket. |
|
13. REMOVE DCM (TELEMATICS TRANSCEIVER)
|
|