(b) Apply auxiliary battery voltage between the terminals of the purge valve (purge VSV) and check that the following occurs when blowing air into the port (E).
OK:
Condition
|
Specified Condition
|
Auxiliary battery voltage applied between terminals 1 and 2
|
Air flows from port (F)
|
Auxiliary battery voltage not applied between terminals 1 and 2
|
Air does not flow
|
If the result is not as specified, replace the purge valve (purge VSV).
|
|
*a
|
Port (E)
|
*b
|
Port (F)
|
*c
|
Air
|
*d
|
Component without harness connected
(Purge Valve (Purge VSV))
|
|
|