Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000267IG |
Model Year Start: 2023 |
Model: Corolla |
Prod Date Range: [09/2022 -
] |
Title: 2ZR-FXE (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: REMOVAL; 2023 - 2025 MY Corolla Corolla HV [09/2022 - ] |
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL RH
Click here
2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
3. REMOVE REAR ENGINE UNDER COVER RH
Click here
4. REMOVE REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH
Click here
5. REMOVE CRANKSHAFT PULLEY
(a) Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.
SST: 09213-58014
91551-80840
SST: 09330-00021
|
|
(b) Using SST and the crankshaft pulley set bolt, remove the crankshaft pulley and crankshaft pulley set bolt.
SST: 09950-50013
09951-05010
09952-05010
09953-05020
09954-05021
HINT:
Apply lubricant to the threads and end of SST.
|
|
6. REMOVE TIMING CHAIN COVER OIL SEAL
(a) Using a knife, cut through the lip of the timing chain cover oil seal.
|
|
*a
|
Cut Position
|
*b
|
Protective Tape
|
|
|
(b) Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain cover oil seal.
NOTICE:
After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.
|