Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000266KH |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] |
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 COOLER THERMISTOR
(a) for Type A:
(1) Install the No. 1 cooler thermistor as shown in the illustration.
Installation Position:
Part
|
Length
|
A
|
50.0 mm (1.97 in.)
|
B
|
61.1 mm (2.41 in.)
|
NOTICE:
-
Be sure to insert the No. 1 cooler thermistor only once because reinserting it into the same position will not allow it to be firmly secured.
-
When reusing the No. 1 cooler evaporator sub-assembly, insert the No. 1 cooler thermistor one row next to the one that has been used previously (X in the illustration).
-
After inserting the No. 1 cooler thermistor, do not apply excessive force to the wire.
-
Directly insert the No. 1 cooler thermistor until the edge of the plastic case "a" comes into contact with the No. 1 cooler evaporator sub-assembly "b".
|
|
*a
|
Securing Part
|
*b
|
Sensor Part
|
|
|
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Click here
3. INSTALL COOLER EXPANSION VALVE
Click here
4. INSTALL COOLING UNIT PARTS
Click here
5. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
Click here
6. INSTALL HEATER CLAMP
Click here
7. INSTALL HEATER GROMMET
Click here
8. INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Click here
9. INSTALL AIR CONDITIONING HARNESS ASSEMBLY
Click here
10. INSTALL BLOWER ASSEMBLY
Click here
|