REMOVAL

PROCEDURE

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Shift Panel)

(a) except Manual Transaxle:

for M20A-FKS: Click here

for 2ZR-FAE: Click here

for HV Model: Click here

(b) for Manual Transaxle:

except G16E-GTS: Click here

for G16E-GTS: Click here

2. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Shift Panel)

except G16E-GTS: Click here

for G16E-GTS: Click here

3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (for Shift Panel)

except G16E-GTS: Click here

for G16E-GTS: Click here

4. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Shift Panel except Manual Transaxle)

Click here

5. REMOVE UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY (for Shift Panel for Manual Transaxle)

except G16E-GTS: Click here

for G16E-GTS: Click here

6. REMOVE VSC OFF SWITCH (COMBINATION SWITCH ASSEMBLY) (for Shift Panel)

(a) except Manual Transaxle:

(1) Disengage the 4 claws to remove the VSC OFF switch (combination switch assembly) from the position indicator housing assembly.

(b) for Manual Transaxle:

(1) Disengage the 4 claws to remove the VSC OFF switch (combination switch assembly) from the upper front console panel sub-assembly.

7. REMOVE NO. 1 INSTRUMENT SIDE PANEL (for Instrument Panel)

Click here

8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Instrument Panel)

Click here

9. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for Instrument Panel)

Click here

10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for Instrument Panel)

Click here

11. REMOVE VSC OFF SWITCH (for Instrument Panel)

(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel.

*a	Protective Tape
	Remove in this Direction