Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM10000000265QK |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System TMMMS Made): ABS Warning Light Remains ON; 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022] |
ABS Warning Light Remains ON
|
DESCRIPTION
This procedure is for troubleshooting when the ABS warning light remains on but no DTCs are output.
The skid control ECU (brake actuator assembly) controls the ABS warning light in the combination meter assembly via CAN communication.
CAUTION / NOTICE / HINT
NOTICE:
-
After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.
Click here
-
Before performing this procedure, depress the brake pedal and confirm that the stop lights illuminate.
PROCEDURE
1.
|
CHECK VEHICLE CONTROL HISTORY (RoB) (ELECTRONICALLY CONTROLLED BRAKE SYSTEM AND ELECTRIC PARKING BRAKE SYSTEM)
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Enter the following menus: Chassis / Brake/EPB / Utility / Vehicle Control History (RoB).
(d) Using the Techstream, check for Vehicle Control History (RoB).
Click here
Chassis > Brake/EPB > Utility
Tester Display
|
Vehicle Control History (RoB)
|
HINT:
If vehicle control history (RoB) is stored when the electronically controlled brake system and electric parking brake system are suspended, the ABS warning light illuminates.
Result
|
Proceed to
|
There is no vehicle control history (RoB) for when the electronically controlled brake system and electric parking brake system were suspended.
|
A
|
There is vehicle control history (RoB) for when the electronically controlled brake system and/or electric parking brake system were suspended.
|
B
|
A
|
|
|
2.
|
INSPECT COMBINATION METER ASSEMBLY
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(d) Perform the Active Test of the combination meter assembly using the Techstream.
Click here
Body Electrical > Combination Meter > Active Test
Tester Display
|
ABS Warning
|
(e) Check the combination meter assembly.
OK:
The ABS warning light turns on or off in accordance with Techstream operation.
|