Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM10000000264XO
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: AUDIO / VIDEO: RADIO RECEIVER: REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during Radio and display receiver assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for HEV Model)

Replaced Part or Performed Procedure

Necessary Procedures

Effect/Inoperative Function When Necessary Procedures are not Performed

Link

*1: for Single Knob Type

*2: w/ Telematics Transceiver

Radio and display receiver assembly*1

Register Vehicle Information*2

-

2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; AUDIO / VIDEO: RADIO RECEIVER: REGISTRATION

Software update

Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)

Replaced Part or Performed Procedure

Necessary Procedures

Effect/Inoperative Function When Necessary Procedures are not Performed

Link

*1: for Single Knob Type

*2: w/ Telematics Transceiver

Radio and display receiver assembly*1

Register Vehicle Information*2

-

2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; AUDIO / VIDEO: RADIO RECEIVER: REGISTRATION

Software update

PROCEDURE

1. PRECAUTION (for TMC Made)

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Single Knob Type): PRECAUTION

2. PRECAUTION (for TMMMS Made)

(a) w/o Navigation System:

NOTICE:

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

NOTICE:

Click here 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Gasoline Model with Dual Knob Type): PRECAUTION

(b) w/ Navigation System:

NOTICE:

  • When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly or navigation ECU may not operate normally.
  • After replacing the radio and display receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.
  • When performing the following work, the navigation system may restart when turning the ignition switch to ACC (due to radio and display receiver assembly and navigation ECU certification).
    • Repair or replace the negative (-) battery terminal due to it being disconnected or depleted.
    • The radio and display receiver assembly or navigation ECU replacement or removal and installation.

NOTICE:

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: PRECAUTION

3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

4. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

Click here 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]; HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: REMOVAL+

5. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

6. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(a) Remove the 4 bolts.

(b) Pull the radio and display receiver assembly with bracket to disengage the 2 clips.

Remove in this Direction

(c) Disconnect each connector and remove the radio and display receiver assembly with bracket.

7. REMOVE NO. 1 RADIO RECEIVER BRACKET

(a) Remove the 3 screws and No. 1 radio receiver bracket.

8. REMOVE NO. 2 RADIO RECEIVER BRACKET

(a) Remove the 3 screws and No. 2 radio receiver bracket.

9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY