| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM10000000264NT |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: BRAKE SYSTEM (OTHER): VACUUM PUMP (for G16E-GTS): REMOVAL; 2023 - 2025 MY GR Corolla [09/2022 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Click here
![2023 MY GR Corolla [09/2022 - 11/2022]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE RADIATOR SUPPORT OPENING COVER
Click here
3. REMOVE INLET NO. 1 AIR CLEANER
Click here
4. REMOVE AIR CLEANER WITH AIR CLEANER HOSE
Click here
5. SEPARATE FUEL TUBE SUB-ASSEMBLY
|
(a) Disengage the clamp to separate the fuel tube sub-assembly. |
|
6. SEPARATE NO. 1 FUEL VAPOR FEED HOSE
|
(a) Disengage the 2 clamps to separate the No. 1 fuel vapor feed hose. |
|
7. SEPARATE ENGINE WIRE
|
(a) Remove the bolt to separate the engine wire. |
|
8. SEPARATE NO. 1 WATER BY-PASS PIPE
|
(a) Remove the bolt and nut to separate the No. 1 water by-pass pipe. |
|
(b) Disengage the clamp to separate the vacuum hose.
9. DISCONNECT CHECK VALVE TO CONNECTOR TUBE HOSE
|
(a) Slide the clip and disconnect the check valve to connector tube hose from the vacuum pump assembly. |
|
10. REMOVE VACUUM PUMP ASSEMBLY
|
(a) Disconnect the vacuum hose from the vacuum pump assembly. |
|
|
(b) Remove the 4 bolts and vacuum pump assembly from the engine assembly. |
|
|
(c) Remove the No. 2 and No. 3 vacuum pump O-rings from the vacuum pump assembly. |
|
|
|